Wolf CGB-20, 3-stupňové čerpadlo

Code: 8611400Z06
2 650,44 € –46 %
Wolf CGB-20, 3-stupňové čerpadlo
2 650,44 € –46 % 1 429 € / pcs
Predaj skončil

Detailed information

Product detailed description

WOLF CGB-20 condensing boiler with built-in plate heat exchanger made of stainless steel for flow-through heating of drinking water.

Boiler supplied with 3-stage boiler pump, combustion air supply dependent or independent of the boiler room area.
  • hangable gas condensing boiler with minimum space requirements
  • ideal for economical heating or efficient water heating
  • peak condensing technology ensures high savings (maximally efficient in condensing - efficiency up to 110%), modulating burner achieving extremely low combustion pollutants
  • the ability to flow heat DHW using a stainless steel plate heat exchanger
  • variants with modulating power from 3.2 to 50 kW
  • clean and balanced design adapts to any space

The Wolf CGB-20 gas-fired wall hung condensing boiler is designed for low-temperature heating systems and potable water heating, with a supply temperature of up to 90 °C and a permissible operating pressure of 0.3 MPa. Modulated burner with extremely low pollutant levels and low noise. High performance heat exchanger made of silicon alloy aluminium alloy with a unique design allowing easy and quick maintenance after the exchanger has been removed from the boiler under full water pressure in the system without the need to drain and fill the water and vent the system. Heat exchanger optionally with electrochemically coated surface to obtain higher corrosion resistance, better condensate drainage and self-cleaning of the exchanger surface meaning higher boiler operating efficiency as well as easier and faster cleaning of the exchanger during boiler maintenance. 3-stage boiler pump for maximum efficiency in condensing (standardized utilization rate up to 110%).

General Parameters:

TYPE CGB-11 CGB-20 CGB-K-20 CGB-24 CGB-K-24 CGB-35 CGB-50
Nominal heat output at 80/60 °C kW 10.0/14.6 19.0/22.9 23.1/27.6 32.0 46.0
Nominal heat output at 50/30 °C kW 10.9 20.5 24,8 34,9 49,0
Nominal heat input kW 10.3/151 19,5 19,5 (23,5) 23,8/28,5 33,0 47,0
Min. heat output (modul.) at 80/60 °C kW 3,2 5,6 7,1 8 11
Min. heat output (modul.) at 50/30 °C kW 3,6 6,1 7,8 9 12,2
Minimum heat input (modulated) kW 3.3 5.7 7,3 8,5 11,7
Dimensions
Height x width x depth mm 855 x 440 x 393
Inlet connection, male thread mm 20 (G 3/4") G 1 1/4"
Return connection, female thread mm 20 (G 3/4") G 1 1/4"
Drinking water heater connection - G 3/4" 1"
Cold water connection - G 3/4" 1"
Gas connection R 1/2" 3/4"
Air supply/exhaust connection mm 95.5/63 125/80
Gas consumption
Natural gas H (Hi=9.5 kWh/m3 = 34.2 MJ/m3 ) m3/h 1.08 (1.58) 2.05 (2.47) 2,50/3,00 3,47 4,94
Gas pressure in the connection
Natural gas mbar 20
Heating
Inlet temperature setting (set by manufacturer) °C 75
Inlet temperature to approx °C 90
Max. total pressure of heated water bar 3,0
Heating water volume in heat exchanger l 1.3 2,5
Water heating flow rate l/min - 2.0-6.5 - 2.0-6.5 -
Special flow quantity "D" at delta T = 30K l/min - 9.4 - 9,4 -
Min. flow. pressure/min. flow. pressure according to EN625b bar - 0.2/1.0 - 0,2/1,0 -
Max. total pressure bar - 10 - 10 -
Water heating temperature range (adjustable) °C - 40-60 40-60 15-65
Water heater exchanger corrosion protection - nehrdz. steel - stainless steel. steel -
Total volume of expansion vessel l 12
Gas pressure in the expansion vessel bar 0,75 -
Fan pressure Pa 90 115 145
Electrical connection
Coverage
Total weight (without water) kg 42 45 42 45 45 45
Amount of condensate at 50/30 °C l/h cca 1,2 cca 2,0 cca 2,4 cca 3,9 cca 5,5
PH value of condensate cca 4.0

  • hanging gas condensing boiler with minimal space requirements

  • ideal for economical heating or efficient water heating

  • peak condensing technology ensures high savings (maximally efficient in condensing - efficiency up to 110%), modulating burner achieving extremely low pollutant values during combustion

  • Capable of flow-through DHW heating using a stainless steel plate heat exchanger

  • variants with modulating power from 3.2 to 50 kW

  • clean and balanced design adapts to any space

  • hanging gas condensing boiler with minimal space requirements

  • ideal for economical heating or efficient water heating

  • peak condensing technology ensures high savings (maximally efficient in condensing - efficiency up to 110%), modulating burner achieving extremely low pollutant values during combustion

  • Capable of flow-through DHW heating using a stainless steel plate heat exchanger

  • variants with modulating power from 3.2 to 50 kW

  • clean and balanced design adapts to any space

  • hanging gas condensing boiler with minimal space requirements

  • ideal for economical heating or efficient water heating

  • peak condensing technology ensures high savings (maximally efficient in condensing - efficiency up to 110%), modulating burner achieving extremely low pollutant values during combustion

  • Capable of flow-through DHW heating using a stainless steel plate heat exchanger

  • variants with modulating power from 3.2 to 50 kW

  • clean and balanced design adapts to any space

  • hanging gas condensing boiler with minimal space requirements
  • ideal for economical heating or efficient water heating
  • peak condensing technology ensures high savings (maximally efficient in condensing - efficiency up to 110%), modulating burner achieving extremely low combustion pollutants
  • the ability to flow heat DHW using a stainless steel plate heat exchanger
  • variants with modulating power from 3.2 to 50 kW
  • clean and balanced design adapts to any space

Additional parameters

Category: Wolf
Warranty: 2 years
Produkt nahradený novým: https://www.atria.sk/protherm-gepard-condens-12-mko/

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Do not fill out this field:
Vytvořil Shoptet | Design Shoptetak.cz.