Wolf CGS-24/200, 3-stupňové čerpadlo
Code: 8611408Z20Product detailed description
Wolf CGS-24/200 stationary gas condensing boiler with stainless steel water exchanger and 90 litre tank with precise hot water layering (startification tank)
- the ultimate gas-fired condensing boiler with minimal space requirements
- ideal for economical heating or efficient water heating
- peak condensing technology ensures high savings (maximally efficient in condensing - up to 110% efficiency), modulating burner achieving extremely low combustion pollutants
- modulated output options from 3.2 to 50 kW
- clean and balanced design adapts to any space
Wolf CGS-24/200 boiler with enamel-protected, quality-certified steel water tank. The 90 litre tank incorporates a hot and cold water distribution system "Turbostop" to dampen the swirling of the water and achieve perfect temperature layering (patent pending). The radial orientation of the water flow in the tank in a radial direction allows uniform filling and draining and therefore a comfortable supply of hot water at a constant temperature. The performance parameters correspond to those of a traditional water heater with a volume of 160 or 200 l, the hot water supply (40 °C) at a peak of 10 min is 199 or 216 l (depending on the boiler output).
General parameters:
| TYP | CGS-20/160 | CGS-24/200 | Nominal heat output at 80/60° C | kW | 19.0/22.9 | 23.1/27.6 | Nominal heat output at 50/30° C | kW | 20.5 | 24.8/ - |
| Nominal heat input | kW | 19.5 (23.5) | 23.8/28.5 | Min. Heat output (modul.) at 80/60° C | kW | 5.6 | 7.1 | Min. Heat output (modul.) at 50/30° C | kW | 6.1 | 7.8 | minimum heat input (modulated) | kW | 5.7 | 7.3 |
| Dimensions | |||
| width x height x depth | mm | 566 x 1,460 x 637 | Inlet connection, external thread | mm | 20 (G 3/4“) | 20 (G 3/4“) | Return connection, female thread | mm | 20 (G 3/4“) | 20 (G 3/4“) | Drinking Water Heater Connection | G 3/4“ | G 3/4“ |
| Cold water connection | G 3/4“ | G 3/4“ | |
| Gas Connection | R 1/2“ | R 1/2“ | Air intake/exhaust connection | mm | 95.5/63 |
| Gas Need | Natural Gas H (Hi=9.5 kWh/m3 = 34.2 MJ/m3) | m3/h | 2.05 (2.47) | 2.50/3.00 | gas pressure in connection |
| Natural Gas | mbar | 20 | Vykurovanie | Inlet Temperature Setting (factory set) | °C | 75 |
| Max. supply temperature to approx | °C | 90 | |
| Max. Total water pressure | bar | 3.0 | |
| Heat water volume in heat exchanger | l | 1.3 | The nominal volume in the OPV stack (equivalent men. volume) | l | 90 (160) | 90 (200) | Special flow quantity "D" at delta T = 30 K | l/min | 23.2 | 25.2 | Hot water preparation capacity | l/h (kW) | 563 (22.9) | 681(27,6) |
| Initial Performance | l/10 min | 199 | 216 | Max. Total Pressure | bar | 10 |
| Heated Drinking Water Temperature Range (adjustable) | °C | 15-65 | Potable water heating coil corrosion protection | stainless steel | Potable water heater tank corrosion protection | enameling to DIN 4753 | Total volume of expansion vessel | l | 12 |
| gas pressure in expansion tank | bar | 0.75 | 0.72 | fan pressure | Pa | 90 |
| Electrical Connection | 230V/50Hz | ||
| Cover | IPX4D | Total weight (excluding water) | kg | 99 |
| amount of condensate at 50/30 °C | l/h | cca 2.0 | condensate pH value | cca 4.0 |
Additional parameters
| Category: | Wolf |
|---|---|
| Warranty: | 2 years |
| Produkt nahradený novým: | https://www.atria.sk/protherm-tiger-condens-20-26-kkz-42/ |
Be the first who will post an article to this item!
Be the first who will post an article to this item!