Wolf CGS-20/160, 3-stupňové čerpadlo
Code: 8611407Z19Product detailed description
Wolf CGS-20/160 stationary gas condensing boiler with stainless steel water exchanger and 90 litre tank with hot water stratification (startification tank)
- hanging gas condensing boiler with minimal space requirements
- ideal for economical heating or efficient water heating
- peak condensing technology ensures high savings (maximally efficient in condensing - up to 110% efficiency), modulating burner achieving extremely low pollutant combustion values
- varieties with modulating output from 3.2 to 50 kW
- clean and balanced design adapts to any space
Wolf CGS-20/160 boiler with enamel-protected steel water tank with a quality-certified finish. The 90 litre tank incorporates a "Turbostop" hot and cold water distribution system to dampen the swirling of the water and achieve perfect temperature layering (patent pending). The radial direction of the water flow in the tank allows for even filling and draining and therefore a comfortable supply of hot water at a constant temperature. The performance parameters correspond to those of a traditional water heater with a volume of 160 or 200 l, the hot water supply (40 °C) at a peak of 10 min is 199 or 216 l (depending on the boiler output).
General parameters:
| TYPE | CGS-20/160 | CGS-24/200 | |
| Nominal heat output at 80/60°C | kW | 19.0/22.9 | 23.1/27.6 |
| Nominal heat output at 50/30°C | kW | 20.5 | 24.8/ - |
| Nominal heat input | kW | 19.5 (23.5) | 23.8/28.5 |
| Min. heat output (modul.) at 80/60°C | kW | 5.6 | 7.1 |
| Min. heat output (modul.) at 50/30°C | kW | 6.1 | 7.8 |
| minimum heat input (modulated) | kW | 5.7 | 7.3 |
| Dimensions | |||
| width x height x depth | mm | 566 x 1,460 x 637 | |
| Inlet connection, male thread | mm | 20 (G 3/4") | 20 (G 3/4") |
| return connection, female thread | mm | 20 (G 3/4") | 20 (G 3/4") |
| Drinking Water Connection | G 3/4" | G 3/4" | |
| Cold water connection | G 3/4" | G 3/4" | |
| Gas Connection | R 1/2" | R 1/2" | |
| air supply/flue exhaust connection | mm | 95.5/63 | |
| Gas consumption | |||
| Natural Gas H (Hi=9.5 kWh/m3 = 34.2 MJ/m3) | m3/h | 2.05 (2.47) | 2.50/3.00 |
| gas pressure in connection | |||
| Natural gas | mbar | 20 | |
| Heating | |||
| Inlet temperature setting (set by manufacturer) | °C | 75 | |
| max. inlet temperature to approx | °C | 90 | |
| Max. total water pressure | bar | 3.0 | |
| heat exchanger heating water volume | l | 1,3 | |
| Opv stack volume (equivalent men. volume) | l | 90 (160) | 90 (200) |
| Special flow quantity "D" at delta T = 30 K | l/min | 23.2 | 25.2 |
| continuous hot water preparation performance | l/h (kW) | 563 (22.9) | 681(27.6) |
| initial performance | l/10 min | 199 | 216 |
| max. total pressure | bar | 10 | |
| Heated potable water temperature range (adjustable) | °C | 15-65 | |
| Potable water heating coil corrosion protection | stainless steel | ||
| potable water heater tank corrosion protection | enamelling according to DIN 4753 | ||
| total volume of expansion tank | l | 12 | |
| gas pressure in expansion tank | bar | 0.75 | 0.72 |
| fan pressure | Pa | 90 | |
| Electrical Connection | 230V/50Hz | ||
| Coverage | IPX4D | ||
| total weight (excluding water) | kg | 99 | |
| amount of condensate at 50/30 °C | l/h | cca 2.0 | |
| condensate pH value | cca 4.0 |
||
Additional parameters
| Category: | Wolf |
|---|---|
| Warranty: | 2 years |
| Produkt nahradený novým: | https://www.atria.sk/protherm-tiger-condens-20-26-kkz-42/ |
Be the first who will post an article to this item!
Peter
Reply
ATRIA.SK
Peter
Reply
jaro
Reply
atria