1300x1000 Plastic Inspection Water Meter Shaft for Drilled Wells

Product detailed description

The 1300x1000 shaft for drilled wells is used for the professional installation of a submersible pump and the necessary accessories above a drilled well. It is made of polypropylene and should be placed below ground level. The 1300x1000 shaft for drilled wells includes: Cover Steps Pipe transition from the shaft 1x - (optional, most often 1") Electrical cable transition Borehole transition for the most common diameters DN 110, DN 125, DN 160, DN 200. This shaft does not include a pump, fittings or accessories. The difference between the individual borehole shafts we offer lies mainly in their width and height, and therefore in the ease of working and installing the water technology. The key factor is the size of the pressure vessel you plan to fit into the shaft. Advantages of the 1300x1000 shaft: simple construction, low weight – easy transport and installation self-supporting construction – no need to encase the shaft in concrete (except where the groundwater level is low) polypropylene – guarantees exceptional chemical and mechanical resistance as well as a long service life entry chimney to the shaft: DN 600mm Placement of the 1300x1000 shaft: The shaft for a drilled well 1300x1100 should be placed below ground level. It is supplied as standard with a plastic lid, which must not be subjected to regular foot traffic or vehicle passage. In the case of this installation, access to the lid must be prevented (e.g. by a removable concrete slab or by fencing off the shaft area). Bottom of the well shaft and placement of the borehole opening: The opening in the shaft for the drilled well, which you choose according to the size of the pipe you have (opening diameter according to your choice: 110; 125; 160; 200), is placed eccentrically, as if at the edge of the inspection entrance to the shaft (see picture). The opening is positioned in this way so that you can easily lower the submersible pump into the borehole, which may be longer than the height of the shaft itself. The opening is placed as close as possible to the outlet from the shaft, also so that as much space as possible remains in the shaft for handling and placing the technology. Our customers most often use: A home water system with a submersible pump and pressure vessel. In this type of home water system, the shaft houses the submersible pump for the borehole, the pressure vessel, the pressure switch, the check valve, the connecting flexi hose, the connection fittings, the ball valve and the water filters. A home water system with a submersible pump and frequency converter. In this type of home water system, the shaft houses only the submersible pump for the borehole. All other components, such as the pressure vessel with fitting (an 8l volume is sufficient), the frequency converter, the check valve, the connection fittings and the water filters, must be placed in the utility room. These components are not included with this shaft. You can purchase them separately in various pump and pressure vessel variants - you will find the full range in the Home Water Systems category.