4" IPRO PROFESSIONAL 8/030T Submersible Pump - RTS for Boreholes and Wells, Stainless Steel, 2200W, 400V

Product detailed description

The multistage, 4" IPRO PROFESSIONAL 8/030T submersible pump is highly resistant to sand and other abrasive substances in the water. Meaning of the RTS designation on the submersible pump (Resistance To Sand) This submersible pump with a floating impeller can be used in new or freshly drilled wells, boreholes, tanks and cesspits. It is suitable for boosting pressure when installed in a distribution pipeline, as well as for domestic or industrial use, and for irrigation or water spraying. The hydraulic part of the 4" IPRO PROFESSIONAL 8/030T pump is separated from the motor (the pump is not built as a monoblock - in the event of a fault, the pump can be easily dismantled. Any repair (which is serviced at our company) is not expensive and is above all quick, which is a great advantage in the event of a fault). The pump is fitted with thermal protection - a fuse. The 4" IPRO PROFESSIONAL 8/030T submersible pump can be used for small and medium fire stations or as part of a home water system with a submersible pump. Professional pumps in the IPRO PROFESSIONAL range can also be used in continuous operation (24/7), which is also a major advantage over hobby pumps or submersible pumps intended primarily for domestic use. Structurally, IPRO PROFESSIONAL pumps are built to be able to pump water from unusually deep wells or boreholes (up to 150m) and to deliver the required amount of water reliably and over the long term. Materials used: Suction/discharge port: AISI 304 Casing: AISI 304 stainless steel Bearings: NSK Shaft and rotor: AISI 304 stainless steel Mechanical seal: ceramic/SiC/NBR Operating conditions: Maximum liquid temperature: 35°C Insulation class: F Operating mode – intermittent and/or continuous Diffuser: reinforced polycarbonate Maximum number of starts per hour: 30 Motor: oil-cooled Motor speed: 2850 RPM