AQUA OLA 4000l Pressure Vessel with Pressure Gauge, Vertical - Upright, Steel, 10 bar, EPDM Bladder for Home Water Systems

Product detailed description

The AQUA OLA 4000l pressure vessel with pressure gauge, vertical - upright, serves as a storage tank for pumped water in home water systems, booster and pressure stations, or industrial stations. The AQUA OLA pressure vessel is designed for customers who don't accept compromises or half-measures when it comes to usability. The quality of the entire product's manufacture - the steel AQUA OLA pressure vessel - is underlined by an extended 3-year warranty. Features of the vertical AQUA OLA 4000l pressure vessel: The pressure vessel can be paired with any type of pump that does not exceed the vessel's maximum working pressure (6 bar). The pressure vessel contains a rubber (EPDM) bladder designed for drinking water. The factory pre-charge pressure is 2 bar. Generally speaking, the larger the installed pressure vessel, the fewer pump start cycles occur, extending the lifespan of the whole system. For pressure vessels with a rubber bladder, it is recommended to check the air pressure in the vessel roughly once every 6 months. When installing a pressure vessel with a rubber bladder, there is no need to deal with topping up air in the tank, which removes the extra maintenance burden associated with that. Most frequently asked question: What exactly does Pressure (bar) - PS pressure and MAX pressure mean? This is a relative expression of pressure, usually the pressure inside a closed space (in our case, the pressure vessel) relative to the pressure in the surrounding space (often atmospheric). PS is the working pressure and indicates the highest pressure at which the pressure vessel can operate correctly and reliably over the long term, measured in bar. For example, in households the pressure in the system should not exceed around 4 to 4.5 bar, and even these values are already borderline. Most commonly, the pressure system in family houses runs up to 3.8 bar. Higher pressure settings in the house can cause problems over the long term, especially affecting various valves and taps. MAX pressure marked on the pressure vessel indicates the pressure at which the vessel was tested at the factory. This tests the overall integrity and strength of the vessel and the strength of its welds. The test is carried out without the bladder inserted. WARNING! A pressure of 15 bar must never be applied to the pressure vessel - it would not work. The bladder would expand until it completely filled the inside of the vessel, and after a few repetitions it would burst. Technical data sheet: