ATMOS DC 105 S

Product detailed description

- 105kW ecological wood gasification boiler – WOOD GAS with induced draft fan and a cooling loop  

It is designed for burning wood on the principle of generator gasification using an induced draft fan (S), which draws flue gases out of the boiler. 
The boiler body is manufactured as a weldment from high-quality steel sheets 3 to 8 mm thick. It consists of a fuel hopper (6mm), which is fitted at the bottom with a gasification nozzle with a longitudinal opening for the passage of flue gases and gases. The afterburning chamber below it is fitted with ceramic shapes for ideal combustion of all combustible substances with high efficiency in environmentally friendly combustion. In the rear part of the boiler body there is a vertical flue gas channel, which is fitted at the top with a starting flap. The top part of the flue gas channel is fitted with an exhaust neck for connection to the chimney.

Frequently Asked Questions

• How to choose the correct output for a solid fuel boiler? Base your choice on the calculated heat loss of the heated building; however, for wood/coal boilers also consider that the boiler burns for several hours at essentially constant output during one filling - it is therefore common practice to supplement the boiler with a thermal storage tank, which stores excess heat for later use instead of the boiler having to be inefficiently throttled down.
• What else do I need to install this boiler? In addition to the boiler itself, the system usually requires: a thermal storage (buffer) tank of appropriate volume, a circulation pump (often already with a built-in Laddomat or thermoregulatory valve against low-temperature corrosion of the boiler), a safety valve, an expansion vessel and a flue/chimney with sufficient draft corresponding to the boiler output - exact chimney draft values can be found in the technical parameters above.
• What fuel is suitable and what is not? Use only the fuel recommended by the manufacturer for the given model (usually split wood of defined length and moisture content, or lignite briquettes or coal depending on the boiler type) - unsuitable or excessively moist fuel reduces efficiency, increases tar and deposit formation, and can damage the boiler.
• What about chimney inspection and legislation? Before putting the boiler into operation, as well as regularly during its use (usually once a year for solid fuels), a chimney inspection/cleaning by an authorized chimney sweep is legally required - without the relevant inspection certificate, an insurance claim in the event of a fire may also be disputed.
• How much maintenance does the boiler require? This usually includes regular removal of ash and cleaning of heating surfaces/flue gas passages from soot (interval depending on intensity of use, usually a matter of weeks), and once a year a thorough inspection including seals and the chimney.
• Can I install the boiler myself? The actual placement and connection of the boiler to the heating system, chimney and safety elements should be carried out or at least professionally checked by a heating technician - this is a device with an open flame, high temperatures and pressurized components, where an installation error can pose a safety risk.