ATMOS DC 30 SX

Product detailed description

- 30kW ecological wood gasification boiler – WOOD GAS with exhaust fan and cooling loop

It is designed for burning wood on the principle of generator gasification using an exhaust fan (S), which draws flue gases out of the boiler.
The boiler body is made as a welded construction from high-quality steel sheets 3 to 8 mm thick. It consists of a fuel hopper (6mm), which is fitted at the bottom with a gasification nozzle with a longitudinal opening for the passage of flue gases and gases. The afterburning chamber below it is equipped with ceramic shaped blocks for ideal combustion of all combustible substances with high efficiency during ecologically friendly combustion. At the rear of the boiler body there is a vertical flue gas channel, which is fitted at the top with a starter damper. The upper part of the flue gas channel is equipped with an exhaust neck for connection to the chimney.

Frequently asked questions

• How to choose the right output for a solid fuel boiler? Base your choice on the calculated heat loss of the heated building, but for wood/coal boilers also consider that the boiler burns for several hours at essentially constant output during one filling - therefore it is common practice to add a buffer tank to the boiler, which stores excess heat for later use instead of the boiler having to be inefficiently throttled down.
• What else do I need for the installation of this boiler? In addition to the boiler itself, the system usually requires: a buffer (equalizing) tank of adequate volume, a circulation pump (often with a built-in Laddomat or thermoregulatory valve against low-temperature corrosion of the boiler), a safety valve, an expansion vessel, and a flue/chimney with sufficient draft corresponding to the boiler output - exact draft values can be found in the technical parameters above.
• What fuel is suitable and what is not? Use only fuel recommended by the manufacturer for the given model (usually piece wood of a defined length and moisture content, or possibly lignite briquettes or coal depending on the boiler type) - unsuitable or excessively moist fuel reduces efficiency, increases tar and deposit formation, and can damage the boiler.
• What about chimney inspection and legislation? Before putting the boiler into operation, as well as regularly during its use (usually once a year for solid fuels), a legally required chimney inspection/cleaning by an authorized chimney sweep is necessary - without the relevant inspection certificate, an insurance claim in the event of a fire may also be disputed.
• How much maintenance does the boiler require? This usually includes regular removal of ash and cleaning of heating surfaces/flue gas paths from soot (interval depending on intensity of use, usually within a few weeks), and once a year a thorough inspection including seals and the chimney.
• Can I install the boiler myself? The placement and connection of the boiler to the heating system, chimney, and safety elements should be carried out or at least professionally checked by a heating technician - this is a device with open flame, high temperatures, and pressure elements, where a connection error can be a safety risk.