ATTACK 15 PLQ COMBI - stationary gas cast iron boiler 12-15 kW

Product detailed description

ATTACK COMBI - stationary cast-iron gas boiler

Stationary gas boilers with a cast-iron heat exchanger are among the most durable and longest-proven heating solutions on the market. Cast iron as an exchanger material is highly resistant to corrosion and thermal shock, and it withstands less gentle operating conditions (frequent switching, fluctuating return water temperature) better than thin-walled steel or aluminium exchangers. Thanks to this, cast-iron boilers have long enjoyed a reputation as robust and reliable appliances suitable not only for ordinary family houses but also for larger buildings, facilities, workshops, small businesses or multi-generational houses with higher heat consumption.

Another advantage of the cast-iron body is easy maintenance and serviceability - a cast-iron exchanger usually consists of individual sections (segments), which means that if one of them gets damaged, only the affected section can be replaced instead of the entire exchanger. In the long run, this can mean lower servicing costs compared to single-piece exchangers. The stationary design (a boiler standing on the floor, not wall-mounted) also simplifies installation at higher outputs and makes it easier to connect to a naturally draught chimney, which is commonly used in both older and newer boiler rooms.

The model you are currently viewing belongs to the ATTACK PLQ COMBI range and is rated for a nominal heat output of 12-15 kW. It is a stationary gas boiler in the COMBI version - in the context of this cast-iron ATTACK range, this means that the boiler itself does not have its own (built-in) domestic hot water (DHW) preparation. To heat hot water, the boiler must therefore be supplemented with an external indirect DHW storage tank (e.g. from the ATTACK Z-series range - see the "How to connect" section below). This type of solution (boiler + separate storage tank) is common and proven especially where greater comfort of hot water draw-off at several points simultaneously is required, since storage water heaters can cover even a temporarily higher DHW demand better than instantaneous heating.

The ATTACK PLQ COMBI range is positioned a notch higher than the basic EKO COMBI range. Compared to it, it offers somewhat more comfortable operation and usually also a wider output modulation range (the boiler can operate within the range stated in the product name, not just at a single fixed value), which in practice results in a smoother adjustment of output to the current heat loss of the building and somewhat more economical operation in transitional periods (spring, autumn). PLQ COMBI is a suitable choice for customers who want a slight upgrade over the most basic range, while still staying at a reasonable price level.

Why a cast-iron exchanger and not a steel or aluminium one?

When choosing a stationary gas boiler, customers often ask why they should opt for a cast-iron exchanger when there are also cheaper steel or lighter aluminium solutions on the market. The answer is mainly related to the long-term durability of the material. Cast iron has higher thermal inertia than thin-walled steel, which in practice means a calmer, less "nervous" combustion process and less material stress during sudden changes in return water temperature (for example, when a cold system starts up after a longer shutdown). At the same time, cast iron is naturally more resistant to condensation corrosion, which can gradually damage thin-walled steel exchangers if operated improperly (long-term low return water temperature).

Another practical argument is the already mentioned sectional (segmented) construction. The cast-iron exchanger is not made of a single piece but of several sections stacked on top of each other and joined with sealing gaskets. If one section were to get damaged over the years of operation (which is also unlikely with cast iron, but theoretically possible, for example due to mechanical damage or extreme neglect of maintenance), a service technician can replace only the affected section without having to replace the entire boiler body. With single-piece steel or aluminium exchangers, this option usually does not exist, and damage to the exchanger means replacing the entire boiler or at least the entire exchanger block.

The disadvantage of cast iron is higher weight (see the approximate figure in the technical parameters table below) and a somewhat slower thermal response when starting up from cold - however, for a stationary boiler intended for long-term, predominantly continuous operation (not frequent switching on/off as with a cottage used only a few times a year), these are rather marginal disadvantages compared to the benefit of a long service life and easier repairability.

Who is this boiler suitable for

The ATTACK PLQ COMBI stationary cast-iron boiler with an output of 12-15 kW is a suitable choice especially where a boiler room is available (it is not intended for wall mounting like common wall-hung combi boilers) and where a naturally draught chimney is available or planned. Typically, this includes:

• Family houses with their own boiler room or utility room, where a long service life and easy serviceability of the appliance matter
• Larger buildings and multi-generational houses with higher heat consumption, where the robustness of the cast-iron body is appreciated
• Smaller facilities, workshops, guesthouses or cottages with year-round or near year-round operation, where the investment in a higher-quality body pays off in a longer service life
• Renovations, where an older cast-iron boiler is being replaced and an existing chimney and gas supply sized for the given output are available

On the other hand, if you are looking for a compact wall-mounted solution for an apartment or a smaller housing unit, or a boiler with its own fast hot water preparation without the need for a separate storage tank, a cast-iron stationary COMBI boiler is probably not the most suitable choice - in that case, we recommend consulting us about a more suitable alternative from ATTACK's wall-hung condensing boilers.

Key features

• Stationary (floor-standing) design with a cast-iron heat exchanger - high resistance to corrosion and thermal shock
• Nominal heat output 12-15 kW, fuel natural gas (LPG version available on request/according to specific order specification)
• COMBI version = boiler without its own DHW preparation, designed to work with an external indirect storage tank (e.g. ATTACK Z-series)
• Sectional (segmented) cast-iron exchanger - in case of damage, allows replacement of an individual section instead of the entire body
• Connection to a naturally draught chimney (atmospheric combustion)
• Robust construction suitable also for larger buildings and facilities with higher heating output requirements
• Wider output modulation range within the stated kW range - smoother adjustment to the building's heat loss
• The delivery includes the boiler body itself, including the burner and basic controls - the external DHW storage tank, circulation pump, expansion vessel, chimney accessories and room thermostat are not included in the basic price unless explicitly stated

Technical parameters

Note: dimensions and weight are given as an approximate estimate based on the output category and typical construction of cast-iron sectional boilers of this class - we recommend verifying the exact value for a specific unit in the manufacturer's current technical data sheet or directly with us before ordering, especially if you are planning precise construction preparation of the room or a niche for the boiler.

How to connect: boiler + external DHW storage tank

Since this is a COMBI version without its own domestic hot water preparation, this boiler needs to be connected together with a separate (external) indirect DHW storage tank. In the ATTACK range, the so-called Z-series of storage tanks is intended for this purpose (e.g. Z100PLUS, Z125PLUS, Z100NTR, Z125NTRA, Z160NTRA, Z125OKC, Z160OKC, Z200OKC and other versions including horizontal wall-mounted OKCV variants) - we sell these storage tanks as a separate product; they are not included in the boiler's delivery or price.

For this output level (up to approx. 18 kW), a smaller storage tank volume from the ATTACK Z-series range is usually sufficient, e.g. ATTACK Z 100 PLUS OKH NTR/HV, Z 100 OKC/NTR/HV or the wall-mounted version Z 125 OKC - the choice between 100 and 125 l volume mainly depends on the number of people in the household and how many hot water draw-off points (bathroom, kitchen, etc.) will be used simultaneously.

The connection principle is briefly as follows: the boiler heats the heating (heat-transfer) water, which circulates both to the heating system (radiators, underfloor heating) and through the exchanger (coil) in the DHW storage tank, where it transfers heat to the domestic water. Switching between the heating circuit and heating of the storage tank is usually handled by a three-way valve (in the ATTACK range, e.g. models OT02 or OT44), controlled either by the boiler's electronics or by a separate room thermostat/controller. The exact connection (pipe routing, placement of pumps, safety and mixing fittings) depends on the specific layout of the boiler room and on whether it is a simple two-pipe system or a more complex system with several heating circuits - we recommend having the final connection designed and carried out by an authorised heating/gas professional who will also take into account locally applicable standards and regulations for connecting a gas appliance.

When ordering the boiler and the storage tank, we will be happy to help you choose a suitable combination of boiler output and tank volume based on the number of people in the household and the number of simultaneously used hot water draw-off points - please do not hesitate to contact us before purchasing if you are unsure about the right choice.

Maintenance and servicing in practice

As with any gas appliance, a regular service inspection of the ATTACK stationary cast-iron boiler (usually once a year, carried out by an authorised service technician) is not only a condition for maintaining the warranty, but above all a prerequisite for safe and economical operation. For cast-iron boilers, servicing usually includes checking and, if necessary, cleaning the exchanger and burner of soot and dust, checking the tightness of joints between individual sections, checking the chimney draught and flue gas path, and verifying the correct combustion settings.

Compared to modern condensing boilers, maintenance of an atmospheric cast-iron boiler is usually simpler and cheaper - for example, there is no need to look after a condensate siphon or an exchanger sensitive to low return water temperature. On the other hand, keep in mind that atmospheric cast-iron boilers of this design do not achieve the efficiency of the most modern condensing solutions, which is a common and fair trade-off between higher initial robustness/simplicity and the highest possible energy efficiency. If the lowest possible gas consumption at any cost is a decisive criterion for you, we will be happy to discuss alternatives from ATTACK's condensing range with you as well.

Frequently asked questions

1. Is domestic hot water (DHW) heating included in the price of this boiler?
No. This is a COMBI version without its own DHW preparation - the boiler only heats the heating water. To heat domestic hot water, an external indirect storage tank must be added (e.g. from the ATTACK Z-series range), which is ordered and paid for separately.

2. Which DHW storage tank is suitable for a boiler with an output of 12-15 kW?
For this output level (up to approx. 18 kW), a smaller storage tank volume from the ATTACK Z-series range is usually sufficient, e.g. ATTACK Z 100 PLUS OKH NTR/HV, Z 100 OKC/NTR/HV or the wall-mounted version Z 125 OKC - the choice between 100 and 125 l volume mainly depends on the number of people in the household and how many hot water draw-off points (bathroom, kitchen, etc.) will be used simultaneously.

3. How does the PLQ COMBI range differ from the other ranges of the ATTACK COMBI cast-iron offering (EKO, PLQ, KLQ, E, EZ)?
In short: compared to the basic EKO COMBI range, it usually offers a wider output modulation range within the stated kW range, which can result in smoother adjustment of output to the current heat demand.

4. What type of fuel is the boiler intended for and can it be converted to another fuel?
In its basic version, the boiler is intended for natural gas. An LPG (propane-butane) version is available on request/according to specific order specification - we recommend stating this requirement when ordering or checking with our sales team in advance.

5. What is the warranty on this boiler?
ATTACK stationary gas boilers carry a warranty of 30 months from commissioning, but no more than 36 months from the date of shipment from the manufacturer's warehouse. The cast-iron exchanger body carries an extended 5-year warranty. The exact warranty conditions are governed by the warranty certificate enclosed with the specific unit, and the prescribed commissioning conditions must be observed (usually carried out by a qualified service technician).

6. Can the boiler be connected to an existing naturally draught chimney?
Yes, this is an atmospheric boiler intended for connection to a naturally draught chimney. The suitability of a specific chimney (diameter, height, material) needs to be assessed individually, ideally during a site visit or in cooperation with a chimney sweep/inspection technician, especially if the boiler is being connected to an older brick chimney.

7. Can the boiler be connected to a system with several heating circuits (e.g. radiators + underfloor heating)?
Yes, combining several circuits with different heating water temperatures is common - however, it requires adding a mixing circuit with its own pump and controls (in the ATTACK range, e.g. sets DPP25007/DPP25008 or ESBE versions DPP25020-DPP25022). We recommend discussing the connection design with a heating designer or directly with our team.

8. Can the boiler be ordered without a DHW storage tank, just the body itself?
Yes - this product represents the boiler body itself. The DHW storage tank, circulation pump, chimney accessories, three-way valve and room thermostat/controller are ordered as separate items according to the needs of the specific installation - we will be happy to prepare a complete list of the necessary accessories tailored to your project.

9. What is the difference between this atmospheric cast-iron boiler and a modern condensing boiler?
An atmospheric cast-iron boiler operates with a higher flue gas temperature and does not utilise the condensation of water vapour from the flue gases for additional heat gain, so its efficiency does not reach the values of modern condensing boilers. In exchange, it offers a simpler construction, lower sensitivity to the return heating water temperature and usually simpler, cheaper maintenance without the need to deal with condensate drainage. The choice between a cast-iron atmospheric and a condensing solution is always a trade-off between initial robustness/simplicity and the highest achievable efficiency - we will be happy to help you consider both directions according to your priorities.

10. Where can I order the boiler and how does delivery work?
You can order the boiler directly through the atria.sk e-shop. When ordering, we recommend also considering ordering a suitable DHW storage tank from the Z-series and any additional accessories (chimney parts, three-way valve, circulation pump, room thermostat) at the same time, so that you have a complete solution ready for installation. If you are unsure about choosing the right combination of boiler + storage tank + accessories, please do not hesitate to contact us before ordering - we will be happy to advise you so that you don't order something you won't ultimately need, or, on the contrary, so that you don't miss anything essential.

Warranty and service

ATTACK PLQ COMBI stationary cast-iron gas boilers carry a standard warranty of 30 months from commissioning of the boiler, but no more than 36 months from the date of shipment from the manufacturer's warehouse (whichever period occurs first). The manufacturer provides an extended 5-year warranty on the cast-iron exchanger body itself. To claim the full warranty period, the commissioning conditions set by the manufacturer must be observed (usually carried out by a qualified service technician authorised for this activity) and a proper service log/warranty certificate must be kept. If you have any questions about the warranty, servicing or choosing suitable accessories (DHW storage tank, circulation pump, chimney parts, controls), please do not hesitate to contact us - we will be happy to help you choose and order a complete solution tailored to your needs.