Automatic home water pump station VESSER JET 100A with ADARA 6

Product detailed description

The automatic home water pump station VESSER JET 100A with ADARA 6, which protects the pump against dry running, backflow of water and water hammer, and has a built-in 0.3L pressure vessel. The automatic home water pump station VESSER JET 100A with ADARA 6 is used mainly seasonally, primarily for irrigation. The self-priming horizontal pump VESSER JET 100 A supplies family houses with clean water from wells, where the suction depth does not exceed 8 m. Single-stage self-priming centrifugal surface pump. The pump body is made of solid cast iron and the motor is equipped with thermal protection. The VESSER JET 100A pump has a power cord terminated with a plug. It is also available in a version with accessories (with a pressure switch and pressure gauge) for easy use in home water pump stations. The motor housing and partition wall are made of alloy. The impeller is made of noryl. The mechanical seal is made of ceramic, graphite and NBR. The pump shaft and rotor are made of AISI stainless steel. Use and advantages of the VESSER JET 100A pump pumping from wells where the suction depth does not exceed 8 metres irrigation high discharge head corrosion resistant easy operation Versatility. If in the future you want to set up a home water pump station with a pressure vessel, the PC-16 will serve you as dry-run protection and a pressure switch. The IBO PC-16 control unit with pressure gauge has a built-in check valve against backflow of water into the pump Digital control unit ADARA 6 with pressure sensor The ADARA 6 control unit replaces the pressure switch and has a built-in 0.3L pressure vessel. The ADARA 6 unit allows you to set the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It features simple and intuitive operation. It guarantees simple and reliable performance The control unit's pressure sensor has a fast response and high accuracy. The highly sensitive display shows the measured pressure in real time. It has flow and pressure modes Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipeline Warning of insufficient water Automatic restart within 24 hours The automatic home water pump station VESSER JET 100A with ADARA 6 includes Pump VESSER JET 100A ADARA 6 control unit with pressure sensor