Automatic Home Water Pump Station with 3" 3Ti-24 Submersible Pump with WATER PASS 2 - RTS, Water Pump for Well

Product detailed description

The automatic home water pump station with the 3TI-24 submersible pump and WATER PASS 2 is mainly used seasonally, primarily for irrigation. Submersible pumps for drinking water are used to supply industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8m) or brought in from a greater distance. The 3Ti-24 submersible pump has increased resistance to sand or other abrasive substances that may be present in the water. The RTS designation on the submersible pump stands for Resistance To Sand The 3Ti-24 submersible pump with floating impellers is also designed for new, fresh boreholes, wells, tanks, water reservoirs and collection shafts. This pump is suitable for boosting pressure when built into a distribution pipeline, as well as for household or industrial irrigation and water spraying. The hydraulic part of the 3Ti-24 pump is separated from the motor (the pump is not built as a monoblock - in the event of a fault, the pump can be easily disassembled. Any repair, (which we carry out) doesn't have to be very costly and is above all quick, which is a big advantage in the event of a fault. The pump is equipped with thermal protection - a fuse. The 3Ti-24 submersible pump is also suitable for small and medium fire-fighting stations, or as part of a home water pump station with a submersible pump. With the WATER PASS 2 control unit you DO NOT NEED a pressure vessel, pressure switch or dry-run protection. WATER-PASS 2 control unit The intelligent WATER-PASS 2 control unit is a device used for the efficient control and protection of the pump. WATER-PASS 2 controls the operation of the pump by monitoring changes in the water pressure level in the pipeline and the flow of water through the pipeline. Automatic switch-on depends on the drop in water pressure in the water system below the set switch-on pressure and on the flow in the pipeline on which the WATER-PASS 2 is installed. In practice, the WATER-PASS 2 control unit switches the pump on when a water tap is opened (or sprinklers are switched on) and switches off about 6 seconds after the tap is closed (or sprinklers switched off). Built-in protective functions of the WATER-PASS 2 unit Fully replaces traditional pressure switches, thanks to the ability to set the activation pressure Protects the pump against dry running. If there is a lack of water, the controller switches off the pump, preventing damage. Protects the pump against the backflow of water, thanks to a built-in check valve Protects the pump against water hammer The automatic home water pump station with the 3Ti-24 submersible pump and WATER PASS 2 includes: Submersible pump 3Ti-24 WATER PASS 2 control unit Connection set for submersible pumps Brass 1" nipple 1" check valve 32x1" adapter with external thread 32x1" adapter with internal thread suspension equipment for submersible pumps