Automatic Home Water Pump Station with 3" STM 28 Submersible Pump and ADARA 6 + Pressure Reducing Valve - RTS, for Wells, Irrigation
Code: PR_121456Product detailed description
Automatic set with 3" submersible pump STM 28 and ADARA 6 control unit. Automatic home water pump station with 3" STM 28 submersible pump and ADARA 6 is used mainly seasonally, especially for irrigation. The 3" STM 28 submersible pump has increased resistance to sand, RTS (Resistance To Sand). The STM 28 submersible pump is used mainly for supplying family houses with drinking water drawn from greater depths (more than 8 m) or brought from a greater distance. It can also be installed in new, fresh boreholes, wells, tanks, water reservoirs and collecting shafts thanks to its increased resistance to sand and abrasive substances in the water. It can also be installed in industrial, residential and agricultural buildings. It is also suitable for small and medium fire-fighting stations or as part of a home water pump station with a submersible pump. The suction and discharge port are made of brass. The impeller and diffuser are made of noryl. The housing, shaft and rotor of the pump are made of AISI 304 stainless steel. With the ADARA 6 control unit you DO NOT NEED a pressure tank, pressure switch or dry-run protection. The pump is fitted with thermal protection - a fuse. The pump motor is oil-cooled. The capacitor is built into the pump motor. The hydraulic part of the 3 STM 28 pump is separated from the motor. Advantages of the automatic water pump station with ADARA 6 control unit The ADARA 6 unit allows setting of the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It allows connection with the pump even without an external pressure tank, as an automatic set. The ADARA 6 control unit itself has a built-in 0.3 L pressure tank. It is characterised by simple and intuitive operation. It guarantees simple and reliable performance. The pressure sensor of the control unit has a fast response and high accuracy. The highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipeline Warning of insufficient water Operation of the water pump station with ADARA 6 control unit for pumping drinking and utility water for supplying industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8 m) practical and versatile use of the 3" STM 28 submersible pump, mainly thanks to its dimensions can also be used in very narrow boreholes supplying water for garden spraying and irrigation When used for irrigation, the control unit should be set to FLOW MODE: After the pump starts, it will continue running as long as water is flowing in the pipeline. If no water flow is detected in the pipeline and the pressure in the pipeline is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can develop. If no water flow is detected during pump operation and the pressure in the pipeline is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water systems. For this water pump station to work reliably, a pressure reducing valve must be used in this set before the ADARA 6 control unit: The pressure reducing valve should be set to a max. pressure of 6 bar It should be installed at the inlet of the ADARA 6 control unit The 1" water pressure reducing valve is included in the package. Automatic home water pump station with 3" STM 28 submersible pump and ADARA 6 includes: 3" STM 28 submersible pump ADARA 6 control unit Connection set for submersible pumps 5/4x1" reducing nipple 1" check valve 32x1" adapter with external thread 32x1" adapter with internal thread Suspension device for submersible pumps 1" pressure reducing valveAdditional parameters
| Category: | Automatic Home Water Pump System with Submersible Pump |
|---|---|
| Weight: | 20 kg |
| EAN: | 8585054510122 |
| Dimensions H x W x D (cm): | 173 x 7.62 |
| Maximum flow rate (l/min): | 100 |
| Pump design - voltage (V): | 230 V |
| Pump head (m): | 108 |
| Supply cable length (m): | 20 |
| EAN: | 8585054510122 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
