Automatic Home Water Pump Station with SQIBO-0.55 Submersible Pump and ADARA 6, Well Water Set
Code: PR_121423Product detailed description
Automatic home water pump station with SQIBO-0.55 submersible pump and ADARA 6 Automatic home water pump station with SQIBO-0.55 submersible pump and ADARA 6 is used mainly seasonally, especially for irrigation. The 3" (three-inch, 74 mm diameter) SQIBO - 0.55 submersible screw pump is constructed as a durable, maintenance-free pump with a wide range of uses. thanks to its solid construction, this pump is one of the most popular screw pumps on the Slovak, Czech, Hungarian and Polish markets thermal protection is fitted directly on the motor winding the pump is ready for immediate use, as the capacitor is built into the motor the pump housing, port, shaft, rotor and screws are made of AISI 304 stainless steel the motor is oil-cooled With the ADARA 6 control unit you DO NOT NEED a pressure tank, pressure switch or dry-run protection. Advantages of the automatic water pump station with ADARA 6 control unit The ADARA 6 unit allows setting of the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It allows connection with the pump even without an external pressure tank, as an automatic set. The ADARA 6 control unit itself has a built-in 0.3 L pressure tank. It is characterised by simple and intuitive operation. It guarantees simple and reliable performance. The pressure sensor of the control unit has a fast response and high accuracy. The highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipeline Warning of insufficient water Operation of the water pump station with ADARA 6 control unit for pumping drinking and utility water for supplying industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8 m) practical and versatile use of the SQIBO - 0.55 submersible pump, mainly thanks to its dimensions can also be used in very narrow boreholes supplying water for garden spraying and irrigation When used for irrigation, the control unit should be set to FLOW MODE: After the pump starts, it will continue running as long as water is flowing in the pipeline. If no water flow is detected in the pipeline and the pressure in the pipeline is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can develop. If no water flow is detected during pump operation and the pressure in the pipeline is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water systems. Automatic home water pump station with SQIBO-0.55 submersible pump and ADARA 6 includes: SQIBO-0.55 submersible pump ADARA 6 control unit Suspension device the length of the cable Connection set for submersible pumps 1" brass nipple 1" check valve 32x1" adapter with external thread 32x1" adapter with internal threadAdditional parameters
| Category: | Automatic Home Water Pump System with Submersible Pump |
|---|---|
| Weight: | 12 kg |
| EAN: | 8585054510191 |
| Dimensions H x W x D (cm): | 55x7.5 |
| Maximum flow rate (l/min): | 35 |
| Pump design - voltage (V): | 230 V |
| Pump head (m): | 70 |
| Supply cable length (m): | 15 |
| EAN: | 8585054510191 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
