Automatic Home Water Pump Station with SQOLA-0.55 Submersible Pump and ADARA 6, 3" Screw Pump for Wells and Boreholes

Product detailed description

Automatic home water pump station with SQOLA-0.55 submersible pump and ADARA 6 Automatic home water pump station with SQOLA-0.55 submersible pump and ADARA 6 is used mainly seasonally, especially for irrigation. The 3" (three-inch) SQOLA 0.55 submersible screw pump has a wide range of uses. It is used for irrigation, as part of home water pump stations for water supply in family houses, and for emptying retention tanks. It is a maintenance-free pump. The pump is very reliable thanks to its solid construction and durable materials. At a low price it offers excellent performance, a head of up to 68 m and a flow rate of up to 29 l/min. It offers a wide range of uses, from pumping groundwater from boreholes and wells to emptying retention tanks, watering and irrigation. The key pump components - housing, port, shaft, rotor and screws - are made of AISI 304 stainless steel. The pump is ready for immediate use, as the capacitor is built into the motor. It has built-in thermal protection on the motor winding. It is oil-cooled. It is suitable for home use. With the ADARA 6 control unit you DO NOT NEED a pressure tank, pressure switch or dry-run protection. Advantages of the automatic water pump station with ADARA 6 control unit The ADARA 6 unit allows setting of the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It allows connection with the pump even without an external pressure tank, as an automatic set. The ADARA 6 control unit itself has a built-in 0.3 L pressure tank. It is characterised by simple and intuitive operation. It guarantees simple and reliable performance. The pressure sensor of the control unit has a fast response and high accuracy. The highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipeline Warning of insufficient water Operation of the water pump station with ADARA 6 control unit for pumping drinking and utility water for supplying industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8 m) practical and versatile use of the SQOLA-0.55 submersible pump, mainly thanks to its dimensions can also be used in very narrow boreholes supplying water for garden spraying and irrigation When used for irrigation, the control unit should be set to FLOW MODE: After the pump starts, it will continue running as long as water is flowing in the pipeline. If no water flow is detected in the pipeline and the pressure in the pipeline is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can develop. If no water flow is detected during pump operation and the pressure in the pipeline is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water systems. Automatic home water pump station with SQOLA-0.55 submersible pump and ADARA 6 includes: SQOLA-0.55 submersible pump ADARA 6 control unit Suspension device the length of the cable Connection set for submersible pumps 1" brass nipple 1" check valve 32x1" adapter with external thread 32x1" adapter with internal thread