Automatic home water pump station with submersible pump 3" 3Ti-17 with ADARA 6 - RTS for well water

Product detailed description

Automatic home water pump station with submersible pump 3Ti-17 with ADARA 6 is used mainly seasonally, primarily for irrigation. The 3" (three-inch, 74mm diameter) submersible pump 3Ti-17 is designed as a durable, maintenance-free pump with a wide range of uses. The submersible pump 3Ti-17 is designed for pumping utility water. The practical and versatile use of the submersible pump 3Ti-17 lies mainly in its dimensions. This narrow pump can be used in boreholes, including very narrow ones. The submersible pump 3Ti-17 is also excellently suited as part of a home water pump station with a submersible pump. With the ADARA 6 control unit you do NOT need a pressure tank, pressure switch or dry-run protection. Advantages of the automatic water pump station with the ADARA 6 control unit The ADARA 6 unit allows setting the switch-on pressure (0.5-6bar) and switch-off pressure (0.8-9bar). It allows connection with the pump even without an external pressure tank, as an automat. The ADARA 6 control unit itself has a built-in 0.3L pressure tank. It features simple and intuitive operation. It guarantees simple and reliable performance. The control unit's pressure sensor has a fast response and high accuracy. A highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is its energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipeline Warning of water shortage Operation of the water pump station with the ADARA 6 control unit When used for irrigation, the control unit should be set to FLOW MODE: Once started, the pump will continue running as long as water is flowing in the pipe. If no water flow is detected in the pipe and the pressure in the pipe is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can generate. If no water flow is detected in the pipe during pump operation and the pressure in the pipe is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water distribution systems. For this water pump station to work reliably, a pressure reducing valve must be used in this set before the ADARA 6 control unit: The pressure reducing valve should be set to a max. pressure of 6 bar It should be installed at the inlet to the ADARA 6 control unit The 1" water pressure reducing valve is included in the package. Automatic home water pump station with submersible pump 3Ti-17 with ADARA 6 includes: 3Ti-17 submersible pump ADARA 6 control unit Connection set for submersible pumps 1" brass nipple 1" check valve Adapter with 32x1" external thread Adapter with 32x1" internal thread 1" water pressure reducing valve Suspension device for submersible pumps