Automatic Home Water System with Submersible Pump 3" STM 24 and ADARA 6 + Reducing Valve - RTS, 1100W, 6000 l/h, Head 93m, Stainless Steel

Product detailed description

An automatic set with the 3" submersible pump STM 24 and the ADARA 6 control unit. The automatic home water system with submersible pump 3" STM 24 and ADARA 6 is used mainly seasonally, primarily for irrigation. The submersible pump 3" STM 24 has increased sand resistance, RTS (Resistance To Sand). The submersible pump STM 24 is used mainly for supplying family homes with drinking water drawn from greater depths (more than 8m) or brought in from a greater distance. It can also be installed in new, freshly drilled boreholes, wells, tanks, reservoirs and collection shafts, thanks to its increased resistance to sand and abrasive substances in the water. It can also be installed within industrial, residential and agricultural buildings. It is also suitable for small and medium-sized fire-fighting stations or as part of a home water system with a submersible pump. The suction and discharge ports are made of brass. The impeller and diffuser are made of Noryl. The pump housing, shaft and rotor are made of AISI 304 stainless steel With the ADARA 6 control unit, you do NOT need a pressure tank, pressure switch or dry-run protection. The pump is fitted with thermal protection - a fuse. The pump motor is oil-cooled. The capacitor is built into the pump motor. The hydraulic part of the 3" STM 24 pump is separated from the motor. Advantages of the automatic water system with the ADARA 6 control unit The ADARA 6 unit allows you to set the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It allows connection with the pump even without an external pressure tank, functioning as an automatic unit. The ADARA 6 control unit itself has a built-in 0.3L pressure tank. It features simple and intuitive control. It guarantees simple and reliable performance. The control unit's pressure sensor has a fast response time and high accuracy. A highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Pipeline overpressure warning Low water warning Operation of the water system with the ADARA 6 control unit for pumping drinking and utility water for supplying industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8m) the practical and versatile use of the submersible pump 3" STM 24 comes mainly from its dimensions can also be used in very narrow boreholes for supplying water for spraying and garden irrigation When used for irrigation, the control unit should be set to FLOW MODE: Once the pump starts, it will continue running as long as water is flowing in the pipeline. If no water flow is detected in the pipeline and the pressure in the pipeline is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can generate. If no water flow is detected in the pipeline while the pump is running and the pressure in the pipeline is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water systems. For this water system to operate reliably, a reducing valve must be used in this set ahead of the ADARA 6 control unit: The reducing valve should be set to a max. pressure of 6 bar It should be installed at the inlet to the ADARA 6 control unit A 1" water reducing valve is included in the package. The automatic home water system with submersible pump 3" STM 24 and ADARA 6 includes Submersible pump 3" STM 24 ADARA 6 control unit Connection set for submersible pumps Reducing nipple 5/4x1" Check valve 1" Adapter with external thread 32x1" Adapter with internal thread 32x1" Suspension device for submersible pumps 1" water reducing valve