Automatic Home Water System with Submersible Pump IBOPROM 1200 AUTO, 1200W, 6000 l/h, 47m

Product detailed description

High-pressure home water system IBOPROM 1200 AUTO with automatic operation control. This automatic submersible water system with an integrated electric control unit is popular mainly for garden irrigation, supplying households with water from circular wells, and pumping clean water from flooded areas with a maximum soft particle size of 1 mm. All models operate fully submerged, have a high IPX8 protection rating, and the maximum medium temperature is 35 °C. IBOPROM 1200 AUTO has the following built-in protective features An electronic control unit that allows automatic switching on and off of the pump Pressure switch and flow switch. Dry-run protection The discharge has a built-in check valve. Built-in starting capacitor and thermal protection against motor overload Advantages of the IBOPROM 1200 AUTO water system High hydraulic parameters — maximum head and flow rate (depending on the model). AUTO — models with automation that supports convenient starting and stopping of the pump. Safety — 230 V power supply, S1 (continuous) operating mode, IPX8 protection, capable of operating at a maximum submersion depth of 7 m. Compact dimensions — make installation in wells, tanks, and narrow shafts easier. Use of the IBOPROM 1200 AUTO water system automatic irrigation irrigation and spraying supplying facilities such as family homes, cottages, and similar transferring water from tanks, reservoirs, ponds and pools draining basements and shafts, occasional drainage of flooded areas, as well as light agricultural work not intended for pumping wastewater, flammable liquids, chemically aggressive substances, fats, oils, or thick suspensions Installation and assembly instructions lower and lift the pump using the rope or handle, never by the power cable or discharge hose use tight connections and a check valve for fixed installations to prevent backflow of the medium ensure adequate working space according to the model's dimensions and free outflow of the pumped water protect electrical connections from water; use grounded outlets with a residual current device (RCD) ≤ 30 mA Maintenance and storage after use, rinse the pump body and discharge opening, remove deposits; do not allow dry running in case of frost risk, remove the pump, drain the water, and store it in a dry place regularly check the condition of the power cable, seals, and the tightness of hydraulic connections