Automatic Home Water System with Submersible Pump SQIBO-0.37 and ADARA 6 for Wells and Irrigation

Product detailed description

Automatic home water system with submersible pump SQIBO-0.37 and ADARA 6 The automatic home water system with submersible pump SQIBO-0.37 and ADARA 6 is used mainly seasonally, primarily for irrigation. The submersible 3" (three-inch, 74 mm diameter) helical rotor pump SQIBO - 0.37 is built as a robust, maintenance-free pump with a wide range of uses. thanks to its robust design, this pump is one of the most popular helical rotor pumps on the Slovak, Czech, Hungarian and Polish markets thermal protection is mounted directly on the motor winding the pump is ready for immediate use, as the capacitor is built into the motor the pump housing, neck, shaft, rotor and screws are made of AISI 304 stainless steel the motor is oil-cooled With the ADARA 6 control unit, you do NOT need a pressure tank, pressure switch or dry-run protection. Advantages of the automatic water system with the ADARA 6 control unit The ADARA 6 unit allows you to set the switch-on pressure (0.5-6 bar) and switch-off pressure (0.8-9 bar). It allows connection with the pump even without an external pressure tank, functioning as an automatic unit. The ADARA 6 control unit itself has a built-in 0.3L pressure tank. It features simple and intuitive control. It guarantees simple and reliable performance. The control unit's pressure sensor has a fast response time and high accuracy. A highly sensitive display shows the measured pressure in real time. Another advantage of the control unit is energy-efficient operation. Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Pipeline overpressure warning Low water warning Operation of the water system with the ADARA 6 control unit for pumping drinking and utility water for supplying industrial, residential or agricultural buildings with drinking water drawn from greater depths (more than 8m) the practical and versatile use of the submersible pump SQIBO - 0.37 comes mainly from its dimensions can also be used in very narrow boreholes for supplying water for spraying and garden irrigation When used for irrigation, the control unit should be set to FLOW MODE: Once the pump starts, it will continue running as long as water is flowing in the pipeline. If no water flow is detected in the pipeline and the pressure in the pipeline is higher than the set starting pressure, the pump will run for 10 seconds and stop at the maximum pressure the pump can generate. If no water flow is detected in the pipeline while the pump is running and the pressure in the pipeline is lower than the set switch-on pressure, the control unit switches to dry-run protection mode and the pump stops. We recommend using the ADARA 6 control unit in clean water systems. The automatic home water system with submersible pump SQIBO-0.37 and ADARA 6 includes: Submersible pump SQIBO-0.37 ADARA 6 control unit Suspension device the length of the cable Connection set for submersible pumps Brass nipple 1" Check valve 1" Adapter with external thread 32x1" Adapter with internal thread 32x1"