Automatically controlled softening head 3/4" - HYS-34

The HYS-34 automatic softener control valve head is specially developed for systems that require solution regeneration. It can also be used with special solutions other than saline for regenerating softening or filtration media, as the parts of the control valve head are made of plastic and ceramics.

The automatic device requires no supervision - it handles the operation and regeneration process entirely on its own based on set values, either according to the treated water volume in cubic meters or in days based on a set time. Setting and controlling the valve head is very simple; the main regeneration steps are shown directly on the front of the head in Czech (backwash, brine draw, fast rinse and brine refill). Time units are given in minutes and the sequence is marked with numbers on the front as well as in the menu.

The "A" designation indicates the option of volume-based or time-based regeneration. You then set the device's capacity and the time period after which, without capacity being used up, a so-called forced regeneration is triggered (the default setting is "H-30" - every 30th day). This is usually used to refresh the resin so that channels do not form within it and untreated water does not flow through.

Devices with the HYS-34 control valve head can be connected and linked by cable in series so that they monitor each other and cannot start regeneration at the same time. If the set capacity is used up simultaneously, while the first module performs regeneration, the second remains in operation, and vice versa. This function can be very useful for ensuring a continuous water supply in apartment buildings and anywhere the system requires treated water without interruption.

The HYS-34 valve is connected to power via a 12 Volt adapter.