ball valve S30 PRO, FF, lever, PN30, 2", CALIDO

Product detailed description

CALIDO S30 PRO ball valve meets the highest hygiene standards.

Intended use: for drinking water distribution, heating systems, cooling systems, pneumatic and oil installations.

Advantages:
✔ dynamic PTFE seal;
✔ gland with the possibility of additional sealing;
✔ the valve stem effectively prevents it from being pushed out of the body even in the event of a sudden pressure increase in the system;
✔ brass parts that come into contact with water are not coated with a layer of nickel;
✔ stainless steel lever for long service life, protected by Geomet® anti-corrosion coating and plastic covers.
✔ a window with a label on the lever allows the relevant device or circuit to be marked;
✔ extended warranty: 5 years.

Parameters:
Temperature range: -20 °C (provided the medium does not freeze) up to +150°C.
Nominal pressure: PN 30.
Threads: FF (female/female).
Connection: 2".

Materials:
• valve body made of high-quality brass CW617N (with reduced lead and nickel content)
• stainless steel ball (eliminates contact of water with chrome)
• stainless steel nut
• control lever made of stainless steel, coated with plastic covers with a window and label that can be used to mark the purpose of the valve.

Seal:
Their tightness (internal – ball tightness and external – stem tightness) is ensured by a PTFE seal.
To increase operational safety, the valve stems are equipped with a double seal:
• the upper part of the stem uses a traditional passive seal with the possibility of additional tightening using a nut
• the lower part of the stem features a modern dynamic seal, in which the additional sealing force increases together with the increasing pressure between the ball and the valve body.

CERTIFICATION / PATENTS:
• National Technical Assessment ITB-KOT-2020/1513, issue 1
• valves in accordance with the requirements of European Directive 2014/68/EU
• NIPH-PZH certificate – intended for use with drinking water
• CE certificate for valve sizes 1 1/2” – 4”
• utility model protection certificate No. 69947
• threads in accordance with standard PN-EN-ISO 228/1.