Circular water meter shaft 1300x1000 with frost protection, plastic

Product detailed description

The water meter shaft with frost protection is made of 6 mm thick polypropylene panels joined by welding. It is used to house the water meter at the point where a building is connected to the water supply. Installing a water meter shaft with frost protection: The shaft is sufficiently reinforced, so in cases where there is no groundwater and the shaft will not be subject to vehicle traffic or located near a road, it is sufficient to place the water meter shaft on a concrete base and backfill it evenly with sand or sieved soil. Although this shaft is watertight, in the event of groundwater, traffic loading, or if the shaft is located near a road, it is necessary to encase the shaft in concrete and ensure that groundwater cannot penetrate to the shaft walls. We do not recommend using an incompletely backfilled water meter shaft, as it could be damaged during winter. It is forbidden to handle this water meter shaft at temperatures below -3°C. The water meter shaft with frost protection includes: steps inside the shaft to make it easier to access the water meter two watertight shaft couplings for pipe connection a walkable cover (intended for foot traffic only) the water meter is not included with the water meter shaft Technical parameters: Certificate: Yes Frost protection: Yes Installation depth: 120 cm Dimensions H x W x D (cm): 130x100x100 Inlet connection size: DN 32 Outlet connection size: DN 32 Inspection opening diameter (mm): 600 Inspection opening height (mm): 300 Maximum number of water meter connections: Max 3 pcs