Circular water meter shaft 1600x1200 with frost protection, plastic, self-supporting

Product detailed description

The water meter shaft with frost protection and a volume of 1.5 m3 is made of 7 mm thick polypropylene panels joined by welding. It is used to house the water meter at the point where a building is connected to the water supply. Installing a water meter shaft with frost protection: The shaft is sufficiently reinforced, so in cases where there is no groundwater and the shaft will not be subject to vehicle traffic, or located near a road, it is sufficient to place the water meter shaft on a concrete base and backfill it evenly with sand or sieved soil. Although this shaft is watertight, (in the event of groundwater with traffic loading, or if the shaft is located near a road), it is necessary to encase the shaft in concrete and ensure that groundwater cannot penetrate to its walls. We do not recommend using an incompletely backfilled water meter shaft. It could be damaged during winter. It is forbidden to handle this water meter shaft at temperatures below -3°C. The water meter shaft with frost protection includes: steps inside the shaft to make it easier to access the water meter two or three watertight shaft couplings for pipe connection a walkable cover (intended for foot traffic only) The water meter is not included with the water meter shaft. Technical parameters: Certificate: Yes Frost protection: Yes Dimensions H x W x D (cm): 160x120x120 Installation depth: 150 cm Inlet connection size: DN 32 Outlet connection size: DN 32 Inspection opening diameter (mm): 600 Inspection opening height (mm): 400 Maximum number of water meter connections: Max 4 pcs