Digital Valve Head G1" with LCD Display for Water Treatment Systems, Automatic Control Unit with Flow Meter

Product detailed description

Automatic control head, G1" connection, for chemical treatment systems with a flow meter, automatically starts the regeneration process once the media in the pressure tank is saturated. Digital control head with control valve designed for installation in chemical treatment systems. The control unit monitors the amount of water flowing through the chemical treatment system and starts regeneration once the active media is saturated. It manages the individual phases of the regeneration process. During operation, the display alternately shows the remaining amount of water until regeneration, the current time, and the regeneration time. The advantage of this head is that during regeneration it still supplies water to the system, but untreated. This process is usually set for the night hours between 02:00-04:00 and takes approximately 90-120 minutes. Connection G1" Drain connection G1/2" Brine tank connection G3/8" Head thread/tank connection 2.5" Power consumption 7W.