Electric Water Heater Floryda, 10L, bottom connection
Code: OW.FL.D10Product detailed description
Technical data:
- Capacity: 10 l
- Connection: bottom (vertical installation)
- Voltage/frequency: 230 V, 50 Hz
- Output: 2000 W
- Thermostat range: 25-75 °C, rotary control
- Thermal cut-out: 93 °C ± 3 °C
- Max. working pressure: 6 bar
- Energy class: A
- Dimensions: 35 x 36 x 26 cm
- Weight: 6.7 kg
- Protection rating: IPX4
The Floryda 10L water heater is designed for a single draw-off point with water supply from below, for example a kitchen sink or smaller washbasin. The cold-rolled steel tank with an enamelled interior (min. 0.35 mm) protects against corrosion, a magnesium anode 15x135 mm provides additional protection, and 20 mm of polyurethane insulation reduces heat loss while water stands in the tank.
Power and heating indicator lights show the current operating status, a 0.6 MPa safety valve protects against overpressure, and the package also includes a mounting kit.
Additional parameters
| Category: | Tesy, Siwell Water Heaters |
|---|---|
| Warranty: | 2 years |
| Weight: | 6.7 kg |
| EAN: | 5903887100854 |
| Model: | Floryda 10L, bottom connection |
| Rated volume: | 10 l |
| Connection type: | Bottom, vertical installation |
| Voltage/frequency: | 230 V, 50 Hz |
| Rated power: | 2000 W |
| Thermostat range: | 25-75 °C (rotary control) |
| Thermal fuse: | 93 °C ± 3 °C |
| Max. working pressure: | 6 bar |
| Safety valve: | 0.6 MPa |
| Energy class: | A |
| Dimensions: | 35 x 36 x 26 cm |
| Weight: | 6.7 kg |
| Protection rating: | IPX4 |
| Tank material: | Cold-rolled steel, enameled interior (min. 0.35 mm) |
| Heating element: | Stainless steel SS840 |
| Insulation: | Polyurethane, 20 mm |
| Magnesium anode: | 15 x 135 mm |
| Power cable: | 150 cm, European plug |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!