Garden Greenhouse LEGI OREGANO 6 x 3 m, 4 mm

Product detailed description

The arched greenhouse by LEGI OREGANO 6 x 3 m made of polycarbonate is made from extra robust galvanized steel tubes (profiles) 20 x 20 mm. The galvanized treatment protects the greenhouse frame against corrosion. The profile is galvanized on both the outer and inner sides. Welded joints are treated with a zinc coating. Thanks to these parameters, the greenhouse stands out with its resistance and robustness. Its load resistance (snow, etc.) is up to 80 kg/m² - suitable for lower and medium (less windy) areas.

The glazing of the greenhouse is made of clear hollow-chamber (multiwall) polycarbonate with a thickness of 4 mm with UV protection, thanks to which it does not become brittle or yellow. The polycarbonate is certified and meets all conditions of health safety.

Deciding between 4 mm or 6 mm polycarbonate?

With 6 mm polycarbonate, the greenhouse naturally has greater overall resistance to weather influences. At the same time, thermal insulation properties increase by approximately 20-30%. Of course, a greenhouse with 6 mm polycarbonate comes at a higher price, specifically about 20% more. However, if you don't live on mountain ridges or grow very demanding plants in the greenhouse, the 4 mm glazing variant is often sufficient.

Other variants of the LEGI Oregano greenhouse HERE.

Assembly

Anchoring the greenhouse is possible in two ways - by digging into the ground or by anchoring to a concrete base. In the case of anchoring into the ground, the overlapping profiles are buried in a trench in the ground up to the mentioned base profile. For burying, excavated soil is sufficient, or for reinforcement we recommend sand or gravel. In the case of anchoring to a concrete base or lost formwork, the profiles intended for burying are not fitted. The individual ends of the greenhouse arches are anchored to the concrete base using so-called angle profiles (not included in the package).

The greenhouse uses an original connecting system and profiles, and the construction of this greenhouse is among the simpler ones compared to others. Another advantage of the LEGI Oregano greenhouse is the already assembled greenhouse ends, which are delivered as 1 piece, to which only the doors and polycarbonate are attached. For the construction of the greenhouse itself, we recommend reserving 1 full day for two people. The construction is not technically demanding, but due to the robustness of the frame and the precision of cutting the polycarbonate, it requires relatively more time. The assembly instructions can be downloaded here: LEGI Oregano Assembly Manual

In addition to taping the ends of the greenhouse, it is also advisable to tape the longitudinal sides of the greenhouse with ventilation tape. These can be sealed only during the assembly of the greenhouse. Therefore, don't forget to buy an extra 1 pack of ventilation tape (33 m length) for this purpose.

Packaging

Each shipment consists of a box with material, a package of profiles and the corresponding number of polycarbonate sheets measuring 6 × 2.1 m. One sheet is always used for cutting the front pieces, the other sheets are not cut - they are intended to cover the arches.

The contents of the package for individual greenhouse lengths are listed in the table below.