Garden Greenhouse LEGI OREGANO 8 x 3 m, 4 mm

Product detailed description

The arched greenhouse by LEGI OREGANO 8 x 3 m made of polycarbonate is manufactured from extra robust galvanized steel tubes (profiles) 20 x 20 mm. The galvanized finish protects the greenhouse frame against corrosion. The profile is galvanized on both the outer and inner sides. Welded joints are treated with a zinc coating. Thanks to these parameters, the greenhouse stands out for its durability and robustness. Load resistance (snow, etc.) is up to 80 kg/m² - suitable for lower and medium (less windy) areas.

Glazing of the greenhouse consists of clear twin-wall (chamber) polycarbonate with a thickness of 4 mm with UV protection, thanks to which it does not become brittle or yellow. The polycarbonate is certified and meets all conditions of health safety.

Deciding between 4 mm or 6 mm polycarbonate?

With 6 mm polycarbonate, the greenhouse naturally has greater overall resistance to weather influences. At the same time, thermal insulation properties are increased by roughly 20-30%. Naturally, the price of a greenhouse with 6 mm polycarbonate is higher, specifically by about 20%. However, if you don't live on mountain ridges or grow very demanding plants in the greenhouse, the 4 mm glazing variant is often sufficient.

More variants of the LEGI Oregano greenhouse HERE.

Assembly

Anchoring the greenhouse is possible in two ways - by burying it in the ground or anchoring it to a concrete foundation. In the case of anchoring into the ground, the overlapping profiles are buried in a trench in the ground up to the aforementioned base profile. For burial, excavated soil is sufficient, or we recommend sand or aggregate for reinforcement. In the case of anchoring to a concrete foundation or lost formwork, the profiles intended for burial are not fitted. The individual ends of the greenhouse arches are anchored to the concrete base using so-called angle profiles (not included in the package).

The greenhouse uses an original connecting system and profiles, and building this greenhouse is simpler compared to others. Another advantage of the LEGI Oregano greenhouse is the already assembled greenhouse ends, which are supplied as 1 unit, to which only the doors and polycarbonate need to be attached. For the assembly itself, we recommend setting aside 1 full day for two people. The assembly is not technically demanding, but due to the robustness of the structure and the precision of cutting the polycarbonate, it requires relatively more time. The assembly instructions can be downloaded here: LEGI Oregano Assembly Instructions

In addition to taping the greenhouse ends, it is also advisable to tape the longitudinal sides of the greenhouse with ventilation tape. These can be sealed only during the greenhouse assembly. Therefore, don't forget to purchase an extra package of ventilation tape (length 33 m) for this purpose.

Packaging

Each shipment consists of a box with material, a package of profiles, and the corresponding number of polycarbonate sheets measuring 6 × 2.1 m. One sheet is always used for cutting the front parts, other sheets are not cut - they are intended to cover the arches.

The contents of the package for individual greenhouse lengths are listed in the table below.