Garden Greenhouse LEGI RADISH 3.2 x 2.4 m, 6 mm

Product detailed description

The Radish apex-roof greenhouse with dimensions (w x h x l) 2.35 m x 2.35 m x 3.17 m made of polycarbonate is manufactured from galvanized sheet metal profiles 1 mm thick. The increased layer of protective zinc coating protects the greenhouse against corrosion and increases its lifespan.

The greenhouse glazing is made of clear hollow-chamber polycarbonate 6 mm thick with UV protection, which has increased thermal insulation properties compared to commonly sold greenhouses. The polycarbonate meets all health safety requirements. The polycarbonate sheets are already pre-cut to size.

The greenhouse has one split front door, so you can open only the upper part. A ventilation window is located on the rear wall. On the side of the front, an eyelet with a loop (included in the package) can be added to secure the open door and window. The greenhouse can be complemented with Guttagarden blocks, which you can use to create a path in the middle of the greenhouse.

Other variants of the Radish greenhouse.

Installation

Anchoring the greenhouse can be done in two ways - burying it in the ground or anchoring it to a concrete base. The bottom part of the greenhouse construction is fitted with a maintenance-free base profile. When anchoring into the ground, the overlapping profiles are buried in a pit in the ground up to the aforementioned base profile. When anchoring to a concrete base, the overlapping profiles must be cut off directly at the base profile, and the base profile then attached to the surface using so-called angle profiles (not included in the package).

We recommend building the greenhouse with two to four people according to the enclosed installation manual.

Don't feel up to installing the greenhouse yourself? Feel free to contact us with your inquiry, our installation teams are at your service.