GETI GEP301 Backup Power Supply, sine wave 300W, wall-mounted + 28Ah battery

Product detailed description

The GETI emergency power supply (EPS - Emergency Power Supply) is a device that ensures a source of AC voltage in the event of a power outage. The emergency power supply can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the grid, and in the event of an outage, the emergency power supply automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power supply may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: Installation of the system must only be carried out by a qualified person! The contacts of the connected battery must be properly protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to the toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharging and polarity reversal.
Technical parameters:
- backup battery type: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 500VA
- rated power: 300W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ± 3% - 50Hz / pure sine wave
- charging current: 5 A /10 A optional
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 11 V ± 0.3V
- battery low voltage disconnect protection: 10.5V ± 0.3V
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- battery cable length: 2 x 75 cm, M8
- dimensions: 210x253x102 mm
- weight: 4kg
Lead-acid battery
Technical parameters:
- manufacturing technology: VRLA (valve regulated lead acid)
- type: AGM
- voltage: 12 V
- capacity: 28 Ah
- dimensions: 166 x 175 x 125 mm
- total height (including terminals): 125 mm
- connection (terminals): 5.5 mm flat screw terminal
- weight: approx. 8.3 kg
Package: 1x GETI GEP301 backup power supply + 28Ah lead-acid battery
Weight: 12.5 kg