GETI GEP301LF Backup Power Supply, Sine Wave, 300 W (500 VA) + LiFePO4 Battery 100 Ah

Product detailed description

The GETI Emergency Power Supply (EPS) is a device that provides an AC power source in the event of a mains power failure. The emergency power supply can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and other devices. In normal mode, the connected device is powered directly from the mains, and in the event of a power failure, the emergency power supply automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power supply may shut down once the connected battery voltage drops below the level set by the manufacturer. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: The installation of the device may only be carried out by a person with appropriate professional qualification! The contacts of the connected battery must be adequately protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear display
- high efficiency thanks to the toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharge and reverse polarity.
Technical parameters:
- type of backup batteries: LiFePO4, AGM, GEL (not included)
- backup battery voltage: 12 V DC
- rated capacity: 500 VA
- rated power: 300 W
- design: wall-mounted
- transformer: toroidal
- input voltage: 230 V AC – 50 Hz
- output voltage: 230 V AC ± 3% – 50 Hz / pure sine wave
- charging current: 3 A / 5 A / 10 A / 15 A (optional)
- charging voltage: 13.9 V – 14.5 V / 13.3 V – 13.9 V (float)
- battery low voltage limit: 10.5 V – 11.5 V (for lead-acid) / 10.9 V – 11.5 V (for LiFePO4)
- low battery voltage disconnect protection: 9.8 V – 11 V (for lead-acid) / 10.6 V – 11 V (for LiFePO4)
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40 °C
- relative humidity: 10% ~ 90%
- storage temperature: -15 °C ~ 45 °C
- battery cable length: 2 x 75 cm, M8
LiFePO4 battery
Technical parameters:
- rated voltage: 12.8 V
- cells: class A+
- capacity: 100 Ah
- energy: 1280 Wh
- charging voltage: 14.4 V (+/- 0.2 V)
- load disconnect: 10 V
- charging mode: CC/CV (1st stage constant current, 2nd stage constant voltage)
- recommended charging current: 20 A
- max. continuous charging current: 100 A (max.)
- max. continuous discharge current: 100 A
- max. peak discharge current: 200 A (5 s) at 25 °C
- lifespan: >6000 cycles at 80% DOD
- BMS: integrated
- display: YES
- Bluetooth: NO
- self-discharge: ≤2%/month at 25 °C
- charging temperature: 0 °C to 45 °C
- discharging temperature: –20 °C to 60 °C
- storage temperature: –5 °C to 35 °C
- configuration: max. 4S4P
- connectors: M8
- protection rating: IP65
- warranty: 2 years
- dimensions (L × W × H): 330 × 172 × 215 mm
- weight: 10.5 kg
Package contents: 1 pc GETI GEP301LF backup power supply + LiFePO4 battery 100 Ah
Package weight: approx. 17 kg