GETI GEP301LF Backup Power Supply, sine wave 300W, wall-mounted (500VA)

Product detailed description

This product comes with a 3-year warranty.
The GETI emergency power system, which can also be combined with LiFePO4 batteries, is a device that provides an AC power source in the event of a mains power failure. The emergency power system can be used as a backup power source for various pumps, automatic boilers, power supplies, emergency lighting, camera systems and more. In normal mode, connected devices are powered directly from the mains, and in the event of a power failure, the emergency power system automatically switches to inverter mode. The connected device is then powered from the connected battery. If power is not restored, the emergency power system may switch off when the voltage of the connected battery drops below the set value. This protects the battery from deep discharge and subsequent damage. The EPS system is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: The contacts of the connected battery must be properly protected against: contact with persons, foreign objects, contact with other parts of the system, or short circuit.
Product description: If needed, another type of battery can also be used, e.g.:
- Inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to the toroidal transformer design
- high charging current
- Protection against overload, short circuit, overload and overvoltage.
Technical parameters:
- Backup battery type: LiFePO4, AGM, GEL (not included)
- backup battery voltage: 12V DC
- rated capacity: 500VA
- rated power: 300 W
- Design: wall mounting
- transformer: toroidal
- input voltage: 230 V AC - 50 Hz
- output voltage: 230 V AC ± 3% - 50Hz / pure sine wave
- charging current: 3A / 5A / 10A / 15A selectable
- Charging voltage: 13.9V-14.5V / 13.3V-13.9V (maintenance)
- Low battery voltage limit: 10.5V-11.5V (for lead-acid)/ 10.9V-11.5V (for LiFePO4)
- Low battery disconnect protection: 9.8V-11V (for lead-acid)/10.6V-11V (for LiFePO4)
- Response time: < 4 ms
- cooling: yes
- Operating temperature: 0 ~ 40 °C
- Relative humidity: 10 % ~ 90 %
- Storage temperature: -15°~45°C
- Battery cable length: 2 x 75 cm, M8
- Dimensions: mm
Packaging: box 1pc / carton 4pcs