GETI GEP500 Sinus 500W Backup Power Supply + 100Ah Battery

Product detailed description

The GETI Emergency Power Supply (EPS) is a device that provides an AC power source in the event of a power grid failure. The emergency power supply system can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the grid, and in the event of a power failure, the emergency power supply system automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power supply system may shut down when the connected battery voltage drops to around 10.2V ± 0.3V. This is to protect the battery against deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: The system must only be installed by a qualified person! The contacts of the connected battery must be suitably protected against: contact with persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to toroidal transformer construction
- high charging current
- protection against overload, short circuit, overcharging and polarity reversal.
Technical parameters:
- backup battery type: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroidal
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ± 3% - 50Hz / pure sine wave
- charging current: 5 A / 10 A optional
- charging voltage: 13.6V ± 0.3V
- low battery voltage limit: 11 V ± 0.3V
- low battery voltage disconnect protection: 10.5V ± 0.3V
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- battery cable length: 2 x 75 cm, M8
- dimensions: 145x180x237 mm
- weight: 6.50 kg
The Geti gel-type lead-acid battery is particularly suitable for solar and wind power systems and caravans, but also as a replacement battery for UPS backup systems, backup power supplies, EZS/EPS applications, telecommunications, warning mobile devices and signaling equipment, etc. It is a maintenance-free, hermetically sealed battery, which allows any operating position.
Technical parameters:
- manufacturing technology: VRLA (valve regulated lead acid) batteries
- type: GEL
- voltage: 12 V
- capacity: 100 Ah
- dimensions: 328 x 172 x 217 mm
- total height (with terminals): 220 mm
- weight: approx. 29.5 kg
- internal resistance (fully charged battery): 5 MOhm
- self-discharge rate <3%, 25 ° C
Package: 1x GETI GEP500 backup power supply + lead-acid battery 100AH
Package weight: 37kg