GETI GEP500LF Backup Power Supply, Sine Wave, 500 W (800 VA) + LiFePO4 100 Ah Battery

Product detailed description

The GETI Emergency Power Supply (EPS) system is a device that provides an AC power source in case of a mains power outage. The emergency power supply can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and other devices. In normal mode, the connected device is powered directly from the mains, and in case of an outage, the emergency power supply automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power supply may shut down once the voltage of the connected battery drops below the level set by the manufacturer. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: Installation of the device may only be carried out by a person with the appropriate professional qualification! The contacts of the connected battery must be adequately protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to the toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharging and reverse polarity.
Technical parameters:
- backup battery type: LiFePO4, AGM, GEL
- backup battery voltage: 12 V DC
- rated capacity: 800 VA
- rated power: 500 W
- design: desktop
- transformer: toroidal
- input voltage: 230 V AC – 50 Hz
- output voltage: 230 V AC ± 3% – 50 Hz / pure sine wave
- charging current: 5 A / 10 A (optional)
- charging voltage: 13.6 V ± 0.3 V
- low battery voltage limit: 11 V ± 0.3 V
- low battery voltage disconnect protection: 10.5 V ± 0.3 V
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40 °C
- relative humidity: 10% ~ 90%
- storage temperature: -15 °C ~ 45 °C
- battery cable length: 2 x 75 cm, M8
- dimensions: 138 x 155 x 226 mm
- weight: 6.5 kg
Geti LiFePO4 battery
Technical parameters:
- rated voltage: 12.8 V
- cells: grade A+
- capacity: 100 Ah
- energy: 1280 Wh
- charging voltage: 14.4 V (+/- 0.2 V)
- load disconnect: 10 V
- charging mode: CC/CV (1st stage constant current, 2nd stage constant voltage)
- recommended charging current: 20 A
- max. continuous charging current: 100 A
- max. continuous discharge current: 100 A
- max. peak discharge current: 200 A (5 s)
- lifespan: >6000 cycles at 80% DOD
- BMS: integrated
- display: YES
- Bluetooth: NO
- self-discharge: ≤2%/month at 25 °C
- charging temperature: 0 °C to 45 °C
- discharging temperature: –20 °C to 60 °C
- storage temperature: –10 °C to 45 °C
- configuration: max. 4S4P
- connectors: M8
- protection rating: IP20
- warranty: 2 years
- dimensions (L × W × H): 330 × 172 × 215 mm
- weight: 10.5 kg
Package contents: 1x GETI GEP500LF backup power supply + LifePO4 100 Ah battery
Package weight: 17 kg