GETI GEP501 Backup Power Supply, Sine 500W, Wall-Mounted + 120Ah Battery

Product detailed description

The GETI emergency power system (EPS - Emergency Power Supply) is a device that provides an AC power source in the event of a power grid failure. The emergency power system can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the grid, and in the event of a power failure, the emergency power system automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power system may shut down when the voltage of the connected battery drops to approximately 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: Installation of the system must only be carried out by a qualified person! The contacts of the connected battery must be adequately protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharging and polarity reversal.
Technical parameters:
- backup battery type: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroidal
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ± 3% - 50Hz / pure sine wave
- charging current: 10A/ 15A/ 20A selectable
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 10.9V ± 0.3V
- battery low voltage disconnect protection: 10.2V ± 0.3V
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- battery cable length: 2 x 75 cm, M8
- dimensions: 210x253x102 mm
- weight: 4.5kg
The Geti gel-type lead-acid battery is especially suitable for solar and wind power systems and caravans, but also as a replacement battery for UPS backup systems, backup power supplies, EZS, EPS applications, telecommunications, warning mobile and signaling equipment, etc. It is a maintenance-free, hermetically sealed battery that allows any working position.
Technical parameters:
- manufacturing technology: VRLA (valve regulated lead acid)
- type: GEL
- voltage: 12 V
- capacity: 120 Ah
- dimensions: 407 x 177 x 222 mm
- total height (including terminals): 225 mm
- weight: approx. 35 kg
- internal resistance (fully charged battery): 4 mΩ
- self-discharge process <3%, 25 °C
Package includes: 1x GETI GEP501 backup power supply + 120Ah lead battery
Carton weight: 39 kg