GETI GEP501 sine 500W wall-mounted backup power supply + 55Ah battery

Product detailed description

The GETI emergency power supply (EPS - Emergency Power Supply) is a device that ensures a source of AC voltage in the event of a power outage. The emergency power supply can be used as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the mains, and in case of a power outage, the emergency power supply automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power supply may shut down once the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a voltage inverter with pure sine wave based on a toroidal transformer, and a fast 32-bit processor.
Warning: The contacts of the connected battery must be properly protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear color display
- high efficiency thanks to the toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharging and polarity reversal.
Technical parameters:
- backup battery type: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroidal
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ± 3% - 50Hz / pure sine wave
- charging current: 10A/ 15A/ 20A selectable
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 10.9V ± 0.3V
- battery low voltage disconnect protection: 10.2V ± 0.3V
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- battery cable length: 2 x 75 cm, M8
- dimensions: 210x253x102 mm
- weight: 4.5kg
The GETI AGM traction lead battery is specially designed for electric drives, offering high performance for driving wheelchairs, electric bicycles, electric scooters, electric kick scooters, and other mobile machines.
It is also suitable for solar and wind power systems, UPS systems, EPS, security technology, etc.
It is a maintenance-free, hermetically sealed battery, allowing any working position.
Technical parameters:
- manufacturing technology: VRLA (valve regulated lead acid)
- type: GEL
- voltage: 12 V
- capacity: 55 Ah (25 °C)
- number of cycles: ≥ Cycles @25℃ ( DoD 80% )
- number of cycles: ≥ Cycles @25℃ ( DoD 50% )
- recommended discharge current: 12A
- charging current for standby mode: 13.75A max. (0.25C)
- charging current for cyclic mode: 13.75A max. (0.25C)
- charging voltage for standby mode: 2.25 - 2.30 V / cell at 25°C
- charging voltage for cyclic mode: 2.40 - 2.45 V / cell at 25°C
- charging method: CV
- self-discharge rate: less than 3% / month at 25°C
- internal resistance (fully charged battery): mΩ
- connection terminals: M6
- charging temperature: -20℃~50℃
- discharging temperature: -40℃~60℃
- storage temperature: -20℃~60℃
- dimensions: 223 x 136 x 172 mm
- total height (with terminals): 177 mm
- weight: approx. 15.0 kg
Package: 1x GETI GEP501 backup power supply + 55AH lead battery
Weight: 20 kg