GETI GEP701LF Backup Power Supply, Sine Wave 700 W (1000 VA) + LiFePO4 100 Ah Battery

Product detailed description

The GETI Emergency Power Supply (EPS) is a device that provides an AC power source in the event of a power grid failure. The emergency power supply can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and other devices. In normal mode, the connected device is powered directly from the grid, and in the event of a power failure, the emergency power supply automatically switches to inverter mode. The connected device is then powered from the connected battery. If the power supply is not restored, the emergency power system may shut down once the voltage of the connected battery drops below the level set by the manufacturer. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: Installation of the device may only be performed by a person with appropriate professional qualifications! The contacts of the connected battery must be adequately protected against: contact by persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- inverter, UPS, AVR and charger in one device
- clear display
- high efficiency thanks to the toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharging and polarity reversal.
Technical parameters:
- backup battery type: LiFePO4, AGM, GEL (not included with the product)
- backup battery voltage: 12 V DC
- rated capacity: 1000 VA
- rated power: 700 W
- design: wall-mounted
- transformer: toroidal
- input voltage: 230 V AC – 50 Hz
- output voltage: 230 V AC ± 3% – 50 Hz / pure sine wave
- charging current: 3 A / 5 A / 10 A / 15 A (optional)
- charging voltage: 13.9 V – 14.5 V / 13.3 V – 13.9 V (float)
- low battery voltage limit: 10.5 V – 11.5 V (for lead-acid) / 10.9 V – 11.5 V (for LiFePO4)
- low battery voltage disconnect protection: 9.8 V – 11 V (for lead-acid) / 10.6 V – 11 V (for LiFePO4)
- response time: < 4 ms
- cooling: Yes
- operating temperature: 0 ~ 40 °C
- relative humidity: 10% ~ 90%
- storage temperature: -15 °C ~ 45 °C
- battery cable length: 2 x 75 cm, M8
LiFePO4 battery
Technical parameters:
- rated voltage: 12.8 V
- cells: grade A+
- capacity: 100 Ah
- energy: 1280 Wh
- charging voltage: 14.4 V (+/- 0.2 V)
- load disconnect: 10 V
- charging mode: CC/CV (1st phase constant current, 2nd phase constant voltage)
- recommended charging current: 20 A
- max. continuous charging current: 100 A (max.)
- max. continuous discharge current: 100 A
- max. peak discharge current: 200 A (5 s) at 25 °C
- lifespan: >6000 cycles at 80% DOD
- BMS: integrated
- display: YES
- Bluetooth: NO
- self-discharge: ≤2%/month at 25 °C
- charging temperature: 0 °C to 45 °C
- discharging temperature: –20 °C to 60 °C
- storage temperature: –5 °C to 35 °C
- configuration: max. 4S4P
- connectors: M8
- protection rating: IP65
- warranty: 2 years
- dimensions (L × W × H): 330 × 172 × 215 mm
- weight: 10.5 kg
Package contents: 1x GETI GEP701LF backup power supply + LiFePO4 100 Ah battery
Package weight: approx. 17 kg