HAKL PL 3.5kW water heater
Code: HAPL135Product detailed description
KEY FEATURES
- installation on HAKL unpressurized water taps
- unpressurized operation 0 bar, switching from 0.9 bar
- hydraulic microswitch activation
- connects to 230V, at 3.5kW directly into a socket
- instant and continuous water heating by up to 43 °C
- one power level of the heating coil
- mechanical protection against coil burnout
- hydraulic protection against overheating of the heating system
PRODUCT DESCRIPTION
The HAKL PL instant water heater starts automatically when the hot water valve (tap) on the mixer is turned. The heater has no built-in tank; it heats water instantly and continuously, and electricity is consumed only while hot water is running. A red light on the front cover indicates that heating is switched on.
Due to its design and dimensions, it is intended for only one point of use, for example a kitchen sink, washbasin… Installation is only possible on a special HAKL unpressurized water tap. The wide range of taps supplied together with accessories (seals, reducers, heater bracket…) allow for a simple, convenient and quick installation. The instant heater is mechanically protected against burnout of the heating coil, and overall overheating of the heating system is prevented by hydraulic protection.
HEATER WIRING
Connection of the HAKL PL electric instant water heater to an unpressurized (three-way) pedestal HAKL water tap. HAKL pedestal unpressurized taps differ from ordinary water taps in that they connect to three hoses.
Taps designed this way disconnect the heater from the pressure in the water system once the hot or cold water valve (tap) is closed. The heater is therefore not permanently stressed by water pressure, which extends its service life.
Illustrative image
SERVICE PACKAGE: PLUS
This product is covered by the SERVICE PACKAGE: PLUS. Extended warranty and free service is automatically included in the product price, and the customer does not pay for selected repairs. Detailed information can be found at www.hakl.sk/servisne-baliky.sk
SUITABILITY TABLE
- mains voltage 228 − 230 V
- dynamic water pressure 0.3 MPa (3 bar)
- inlet water temperature 12°C
Additional parameters
| Category: | Water heaters and taps|Unpressurised instant water heaters |
|---|---|
| Weight: | 0.87 kg |
| EAN: | 8586018642491 |
| Manufacturer:: | HAKL - made in Slovakia |
| Power input:: | 3.5 kW |
| Voltage:: | 230 V |
| Fuse protection:: | 16 A |
| Volume:: | 0 l |
| Protection degree:: | IP 24 |
| Pressure operation:: | no |
| Max. continuous water pressure:: | 0 bar |
| Min. switching pressure:: | 0.9 bar |
| Switching type:: | hydraulic |
| Manual power switching:: | no |
| Automatic power control:: | no |
| Electricity consumption measurement:: | no |
| Water consumption measurement:: | no |
| Thermal protection:: | yes |
| Second stage thermal protection:: | no |
| Heating indication:: | yes |
| Water temperature display:: | no |
| Connection outlet spacing:: | 30 mm |
| Connection threads:: | 3/8" external |
| Water flow at 40°C:: | 2.0 l/min |
| Water flow at 60°C:: | 1.2 l/min |
| Frost protection fuse:: | no |
| Product includes connection cable:: | yes |
| Cable terminated with plug:: | yes |
| Connection cable type:: | 3C 1.5 mm Flexo |
| Connection cable length:: | 100 cm |
| Net weight:: | 0.75 kg |
| Gross weight:: | 0.87 kg |
| Product dimensions (h x w x d):: | 20.2 x 18.6 x 8.2 cm |
| Box dimensions (h x w x d):: | 22 x 21.2 x 10 cm |
| EAN:: | 8586018642491 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!