HAKL PL-T 3.5kW water heater
Code: HAPLT135Product detailed description
KEY FEATURES
- installation on unpressurized and commonly available water taps
- pressurized operation 6 bar, switching on from 0.9 bar
- hydraulic microswitch activation
- connection to 230V, at 3.5kW directly into a socket
- instant and continuous water heating by up to 43 °C
- one power level of the heating element
- electronic protection against element burnout
- hydraulic protection against overheating of the heating system
PRODUCT DESCRIPTION
The instantaneous water heater HAKL PL-T is structurally and technically developed from the HAKL PL model range. Thanks to reinforced joints, seals and an electronic control unit, the heater can also be installed in a water system with standard taps, using plumbing fittings. Due to its design and dimensions, it is intended for connection to only one point of use. Easy mounting of the heater under a sink or washbasin is achieved by screwing on the wall bracket, which is standard-fitted to the rear cover of the product. The electronic unit with a thermal fuse and the hydraulic protection significantly extend the service life of the heating element.
Other specifications are identical to those of the HAKL PM-B model range.
HEATER WIRING
The pressurized design of the electric instantaneous water heater HAKL PL-T also allows connection to a standard pillar-type water tap.
Illustrative image
SERVICE PACKAGE: PLUS
This product is covered by the SERVICE PACKAGE: PLUS. Extended warranty and free servicing are automatically included in the product price, and the customer does not pay for selected repairs. Detailed information is available at www.hakl.sk/servisne-baliky.sk
SUITABILITY TABLE
- mains voltage 228 − 230 V
- dynamic water pressure 0.3 MPa (3 bar)
- inlet water temperature 12°C
Additional parameters
| Category: | Water Heaters and Taps|Pressurized Instant Water Heaters|PL-T |
|---|---|
| Weight: | 0.99 kg |
| EAN: | 8586018642521 |
| Manufacturer:: | HAKL - made in Slovakia |
| Power input:: | 3.5 kW |
| Voltage:: | 230 V |
| Fuse protection:: | 16 A |
| Volume:: | 0 l |
| Degree of protection:: | IP 24 |
| Pressure operation:: | yes |
| Max. continuous water pressure:: | 6 bar |
| Min. switching pressure:: | 0.9 bar |
| Switching type:: | hydraulic |
| Manual power switching:: | no |
| Automatic power control:: | no |
| Electricity consumption measurement:: | no |
| Water consumption measurement:: | no |
| Thermal protection:: | yes |
| Second-stage thermal protection:: | no |
| Heating indication:: | yes |
| Water temperature display:: | no |
| Connection outlet spacing:: | 30 mm |
| Connection threads:: | 3/8" male |
| Water flow at 40°C:: | 2.0 l/min |
| Water flow at 60°C:: | 1.2 l/min |
| Frost protection fuse:: | no |
| Product includes connection cable:: | yes |
| Cable terminated with plug:: | yes |
| Connection cable type:: | 3C 1.5 mm Flexo |
| Connection cable length:: | 100 cm |
| Net weight:: | 0.85 kg |
| Gross weight:: | 0.99 kg |
| Product dimensions (h x w x d):: | 20.2 x 18.6 x 8.2 cm |
| Box dimensions (h x w x d):: | 22 x 21.2 x 10 cm |
| EAN:: | 8586018642521 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!