HAKL TFX 150/10 m2, Grid

Product detailed description

KEY FEATURES

• designed for wet installation, embedded in adhesive mortar
• ideal for renovations thanks to the thin cable thickness of only 3 mm
• suitable for ceramic tiles, glued vinyl flooring and more
• self-adhesive fixing strips on the underside of the mat
• protective cable braiding allows installation in damp spaces
• can also be used as the main heat source in a room
• maintenance-free operation, no need for regular servicing
• quality heating cores with a melting point of up to 1100 °C
• every product undergoes strict final inspection testing

PRODUCT DESCRIPTION

The HAKL TFX 150 electric underfloor heating mats have an output of 150 W per square metre and a standard strip width of 0.5 m. They are connected to the electrical network using a single connection cable 3 metres long.  To achieve the most efficient operation, it is advisable to install a HAKL TH thermostat with a floor sensor in each room. Energy and thus cost savings can also be achieved by correctly choosing the  floor covering and sufficient thermal insulation beneath the underfloor heating. Thanks to maintenance-free operation, HAKL underfloor heating meets even the most demanding requirements for quality and comfort.
Before installation, the manufacturer recommends reading the installation manual carefully, where you will find a detailed description of the product and how to connect it. 

Illustrative image of connecting HAKL TFX underfloor heating using a single connection cable.

FLOOR STRUCTURE

The HAKL TFX 150 heating mats are designed for wet installation, embedded in adhesive mortar directly under the floor covering. With this floor structure, so-called "DIRECT HEATING" is achieved. The heating mat is placed between the floor covering and the thermal insulation, which allows the heating to warm up quickly. It is therefore recommended for spaces used only temporarily, or for renovations where there is not enough space to raise the floor level.

 Illustrative image of the floor structure: 
1. floor covering - tiles, 2. flexible adhesive mortar, 3. HAKL TF heating mat, 4. HAKL TB insulation, 5. adhesive glue, 6. concrete base  

HEATING CABLE

The HAKL TFX heating cables feature a quality heating core - the resistance wire is from the renowned Swedish manufacturer KANTHAL. The heating cable sheath is made of highly heat-resistant material, with an overall cable thickness of 3 mm, which does not deform even during prolonged heating. When underfloor heating is connected without a thermostat, the heating cable heats up to a maximum of 65°C, while its melting point is up to 1100 °C. 
The heating cables themselves are protected by dense metal braiding, which increases their durability and allows installation in damp spaces (bathroom, WC…)

Illustrative image, cross-section of the heating cable.

QUALITY CERTIFICATE

Every single heating mat undergoes a final load test, during which the joints are tested, insulation breakdown is measured, overall cable resistance, etc...
This record of individual unit testing is stated in the Quality Certificate. The product must meet the parameters 100% before it can leave the production line. 

Illustrative image.

SUITABILITY TABLE