Home Water Pump System with 3″ IPRO 1-20 Submersible Pump and Frequency Converter - RTS, Automatic Water Pumping Station

Product detailed description

Use: regulation of constant pressure in the system via a frequency converter pumping utility and drinking water from deep and narrow boreholes and wells transferring water between tanks irrigation and sprinkling setting up water supply for family houses, cottages, community and agricultural buildings water supply automatic pressure stations suitable for domestic and professional use suitable for continuous operation The multistage submersible pump 3″ IPRO 1-20 has increased resistance to sand and other abrasive substances that may be present in the water. The RTS designation on the submersible pump stands for Resistance To Sand. Thanks to its floating impellers, this submersible pump can also be used in new or fresh boreholes, wells, tanks, water reservoirs and collecting shafts. It is also suitable for boosting pressure when installed in a distribution pipeline, as well as for domestic or industrial use and for irrigation or sprinkling. The hydraulic part of the 3″ IPRO 1-20 pump is separated from the motor (the pump is not built as a monobloc) - in the event of a fault, the pump can be easily disassembled. Any repair (carried out at our service centre) need not be costly and is above all quick, which is a great advantage in case of a fault. The pump is fitted with thermal protection - a fuse. The 3″ IPRO 1-20 submersible pump is also suitable for small and medium fire-fighting stations, or as part of a home water pump system with a submersible pump. Professional pumps from the IPRO PROFESSIONAL range can also be used in continuous operation (24/7), which is also a great advantage over hobby pumps or submersible pumps used mainly for domestic use. Structurally, IPRO PROFESSIONAL pumps are built to reliably and durably pump water from unusually deep wells or boreholes (up to 150m) and to deliver the required amount of water in the long term. Advantages: electronic motor speed regulation via a built-in frequency converter smooth, gentle pump start-up protection against dry running and low water level protection against overvoltage and undervoltage protection against overload protection against overheating stainless steel construction guarantees a long service life and protection against corrosion encapsulated single-phase motor floating impellers mounted in their own bearing suitable for pumping from depths greater than 8 m suitable for domestic and industrial use easy assembly and disassembly The home water pump system with 3″ IPRO 1-20 submersible pump and frequency converter includes: Submersible pump 3″ IPRO 1-20 IQ-E 2,2kW frequency converter + pressure sensor 8l pressure tank for balancing system pressure, with connection fitting 1" nipple 1" check valve Transition piece with 32x1" male thread 2x Suspension device for the submersible pump suspension device for submersible pumps Materials used: Suction/discharge nozzle: AISI 304 Housing: AISI 304 stainless steel Shaft and rotor: AISI 304 stainless steel Impeller: technologically enhanced pump-grade Noryl Diffuser: reinforced polycarbonate Mechanical seal: ceramic/SiC/NBR Bearings: NSK Operating conditions: Maximum liquid temperature 35°C Maximum ambient temperature 35°C Insulation class F Operating mode - intermittent or continuous Protection rating - IP68 Maximum number of switch-ons per hour: 30 Motor: oil-cooled Motor speed: 2850RPM