Home Water System with 3" IPRO 1-20 / 50L Submersible Pump - RTS, Well Water Set

Product detailed description

The multistage 3″ IPRO 1-20 submersible pump has increased resistance to sand and other abrasive substances that may be present in the water. The submersible pump marked RTS stands for (Resistance To Sand). This submersible pump with floating impellers can also be used in new or fresh boreholes, wells, tanks, water reservoirs and collection shafts. It is also suitable for boosting pressure when built into a distribution pipeline, and also for domestic or industrial irrigation or water spraying applications. The hydraulic part of the 3″ IPRO 1-20 pump is separated from the motor (the pump is not built as a monobloc) - in case of a fault the pump can be easily dismantled. Any repair (carried out at our service centre) need not be costly and is, above all, quick, which is a great advantage in the event of a fault. The pump is equipped with thermal protection - a fuse. The 3″ IPRO 1-20 submersible pump is also suitable for small and medium fire-fighting stations, or as part of a home water system with a submersible pump. Professional pumps of the IPRO PROFESSIONAL range can also be used in continuous operation (24/7), which is also a great advantage over hobby pumps or submersible pumps that are mainly used for domestic purposes. IPRO PROFESSIONAL pumps are constructed to be able to pump water from unusually deep wells or boreholes (up to 150m) and to deliver the required amount of water reliably over the long term. Materials used: Suction/discharge port: AISI 304 Housing: AISI 304 stainless steel Shaft and rotor: AISI 304 stainless steel Impeller: technologically enhanced pump-grade noryl Diffuser: reinforced polycarbonate Mechanical seal: ceramic/SiC/NBR Bearings: NSK Operating conditions: Maximum liquid temperature 35°C Maximum ambient temperature 35°C Insulation class F Operating mode - intermittent or continuous Protection rating - IP68 Maximum number of starts per hour: 30 Motor: oil-cooled Motor speed: 2850 RPM Use: when setting up water supply systems in family houses, cottages, summer residences, schools and farm buildings for spraying and garden irrigation in fresh/new wells and boreholes Advantages: use when pumping water from depths greater than 8 m able to draw and pump water containing sand or other abrasive substances, which are usually still present in fresh/new boreholes the 50L vertical pressure vessel used in this set is of high quality with an extended warranty. If you prefer to use a horizontal pressure vessel instead, simply state this in the notes section of your order. The price of the home water system will not change. The home water system with 3" IPRO 1-20 / 50L submersible pump includes: 3" IPRO 1-20 pump 50L vertical pressure vessel PC-2 pressure switch 1" nipple 1" check valve 80cm connecting hose transition piece with 32x1" male thread transition piece with 32x1" female thread 1" MF ball valve