Home water system with submersible pump 3" IPRO 1-27 / 50l - RTS, set for wells and boreholes

Product detailed description

The multi-stage submersible pump 3″ IPRO 1-27 has increased resistance to sand and other abrasive substances that may be present in the water. The RTS designation on the submersible pump stands for Resistance To Sand. This submersible pump with floating impellers can also be used in new or freshly drilled boreholes, wells, tanks, water reservoirs and collection shafts. It is also suitable for boosting pressure when installed in a distribution pipeline, as well as for domestic or industrial use and for irrigation or spraying with water. The hydraulic part of the 3″ IPRO 1-27 pump is separated from the motor (the pump is not built as a monoblock) - in case of a fault the pump can be easily disassembled. Any repair (carried out at our service centre) does not have to be expensive and is above all fast, which is a big advantage in the event of a fault. The pump is fitted with thermal protection – a fuse. The 3″ IPRO 1-27 submersible pump is also suitable for small and medium fire-fighting stations, or as part of a home water system with a submersible pump. Professional pumps from the IPRO PROFESSIONAL range can also be used in continuous operation ( 24 / 7 ) which is also a major advantage over hobby pumps or submersible pumps used mainly for home use. IPRO PROFESSIONAL pumps are designed to pump water from unusually deep wells or boreholes ( up to 150m ) and to reliably and durably deliver the required amount of water. Materials used: Suction/discharge port: AISI 304 Housing: AISI 304 stainless steel Shaft and rotor: AISI 304 stainless steel Impeller: technologically enhanced pump-grade Noryl Diffuser: reinforced polycarbonate Mechanical seal: ceramic/SiC/NBR Bearings: NSK Operating conditions: Maximum liquid temperature 35°C Maximum ambient temperature 35°C Insulation class F Operating mode - intermittent or continuous Protection - IP68 Maximum number of starts per hour: 30 Motor: oil-cooled Motor speed: 2850 RPM Use: for setting up water supply systems in family houses, cottages, holiday homes, schools and farm buildings for garden spraying and irrigation in fresh/new wells and boreholes Advantages: can be used to pump water from depths greater than 8 m can draw in and pump water containing sand or other abrasive substances that are typically still present in fresh/new boreholes the vertical 50L pressure tank used in this set is of high quality with an extended warranty. If you prefer to use a horizontal pressure tank instead, simply state this in the notes section of your order. The price of the home water system will not change. The home water system with submersible pump 3" IPRO 1-27 / 50L includes: pump 3" IPRO 1-27 vertical 50L pressure tank PC-2 pressure switch 1" nipple 1" check valve 80cm connecting hose transition piece with 32x1" male thread transition piece with 32x1" female thread MF ball valve, M 1"