Hybrid Voltage Inverter CARSPA MKS-2.2K, DC/AC 12V/1800W, MPPT Controlled

Product detailed description

Product description: hybrid voltage inverter CARSPA MKS-2.2K, DC/AC 12V/1800W, MPPT controlled
The device combines a pure sine wave inverter, UPS and MPPT controller for solar panels. It is therefore a backup power source with backup from the mains or a generator, a battery charger and an MPPT controller for solar panels, while the backup priority can be set the other way round, i.e. mains priority and backup from batteries or photovoltaic panels.
Product parameters:
- Pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase off-grid output without dip (cannot be connected in parallel to the grid)
- clear and adjustable LCD display
- option to choose operating modes and power priority
- adjustable operating parameters as needed
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and excessive battery discharge
- possibility to use AGM and GEL batteries or LiFePO4 batteries (for experienced users only)
- if solar energy is not available, the battery can be automatically recharged from the mains
- audible warning of fault status and malfunction
- cold start function and eco mode
- powerful active cooling
Specifications:
- Input mains voltage: 90-280 V AC
- frequency: 50/60 Hz (automatic detection)
- output: 1 phase, 230 V AC +- 5%
- inverter power: 1800 W / 2200 VA
- Peak power: 3600 W / 4000 VA for 5 seconds
- Switching delay 10-20 ms.
- Output waveform: pure sine wave
- battery voltage: 12 V
- float voltage: 13.5 V
- Battery overvoltage: 16 V
- Battery type: AGM, GEL, LiFePO4 (must be set correctly!)
- max. charging current from the mains: 60 A
- max. MPPT controller current: 80 A
- max. panel power: 2000 W
- max. solar panel voltage (Voc): 450 V DC
- MPPT controller operating voltage range: 55 - 430 V
- Inverter power priority: solar only/UPS/mains-powered batteries
- Charging priority: solar power/mains/solar power + mains/solar power only
- own consumption: 2 W
- efficiency: 98%
- dimensions: 405 x 286 x 96 mm
- operating temperature: 0 to 55 °C
- weight: 5 kg
- protection rating: IP20
This product requires professional installation.