Hybrid voltage inverter CARSPA MKS3200, DC/AC 24V/3000W, MPPT controller

Product detailed description

Product description: hybrid voltage inverter CARSPA MKS3200, DC/AC 24V/3000W, MPPT controller
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is therefore a backup power source with mains or generator backup, a battery charger and an MPPT controller for solar panels, with the backup priority also settable in reverse, i.e. with mains priority and battery or PV panel backup.
Product parameters:
- Pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase island output without dip (cannot be connected in parallel to the grid)
- clear and adjustable LCD display
- selectable operating modes and power priority
- adjustable operating parameters as needed
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and excessive battery discharge
- possibility of using AGM and GEL batteries or LiFePO4 batteries (for experienced users only)
- if solar energy is not available, the battery can be automatically recharged from the grid
- audible warning for fault and error conditions
- cold start function and power-saving mode
- powerful active cooling
Specifications:
- Input voltage: 90-280 V AC
- frequency: 50/60 Hz (automatic detection)
- output: 1 phase, 230 V AC +- 5%
- inverter power: 3000 W / 3200 VA
- Peak power: 6000 W / 6200 VA for 5 seconds
- Switching delay 10-20 ms.
- Output waveform: pure sine wave
- battery voltage: 24 V
- float voltage: 27 V
- Battery overvoltage: 32 V
- Battery type: AGM, GEL, LiFePO4 (must be set correctly!)
- max. charging current from grid: 60 A
- max. MPPT controller current: 80 A
- max. panel power: 3000 W
- max. solar panel voltage (Voc): 450 V DC
- MPPT controller operating voltage range: 55 - 430 V
- Inverter power priority: solar only/UPS/mains-powered battery
- Charging priority: solar energy/mains/solar energy + mains/solar energy only
- own consumption: 2 W
- efficiency: 98%
- dimensions: 405 x 286 x 96 mm
- operating temperature: 0 to 55 °C
- weight: 5.4 kg
- protection rating: IP20
This product requires professional installation.