HydroSoft COMFORT Maxi Water Softener

Intelligent Regeneration

Using a microprocessor and a precise water meter (flow monitoring from as low as 2 liters/min.), water consumption is monitored and the control head sets the regeneration time accordingly so that you never run out of softened water.

Counter-current Regeneration and Skipping the Backwash

The salt solution is drawn in by reverse flow, which mixes the softening cation resin more effectively, and it is possible to skip the backwash of the softening material (this functionality is pre-programmed by Danum s.r.o.). Thanks to counter-current regeneration, there will be lower consumption of water and salt.

Multilingual Graphic Display

Built-in Blending

Directly on the control valve there is an option to set the ratio of blended raw water, allowing you to set the minimum hardness of your water.

Resin Disinfection

Using the control head, the disinfection unit is connected directly to create the possibility of disinfecting the resin filling (can be ordered additionally). This disinfection unit uses free chlorine created from the salt solution to disinfect the softening material during each regeneration. This process is standard in several European countries.

Bypass Valve

There is an option to order a bypass valve, which allows you to disconnect the device from the water supply system. This part can be advantageous in cases when the device needs to be moved, for example when replacing the cation resin, painting walls behind the device, and similar situations.