HydroSoft COMFORT Mini Water Softener

Intelligent regeneration

Using a microprocessor and a precise water meter (flow monitoring from as low as 2 liters/min), water consumption is monitored and the control head sets the regeneration time accordingly, so you never run out of softened water.

Counter-current regeneration and rinse skipping

The salt solution is drawn in by counter-current flow, which mixes the softening resin more effectively, and allows the backwash rinse of the softening material to be skipped (this function is pre-programmed by Danum, s.r.o.). Thanks to counter-current regeneration, there will be lower water and salt consumption.

Multilingual graphic display

Built-in blending

Directly on the control valve, it is possible to set the blending ratio of raw water, so you can set the minimum hardness of your water.

Resin disinfection

The disinfection unit connects directly via the control head, creating the possibility of disinfecting the resin filling (can be ordered separately). This disinfection unit uses free chlorine generated from the salt solution to disinfect the softening material during each regeneration. This process is a standard practice in several European countries.

Bypass valve

It is possible to order a bypass valve, which allows the device to be disconnected from the water system. This part can be useful when the device needs to be moved, for example when replacing the resin, painting walls behind the device, and similar situations.