Jádromodul - Pre-wall Installation System for Dry Installation (into bathroom core units), WITH TABLET DISPENSER

Product detailed description

Supplied with a WC tablet dispenser.

Use:
For wall-hung WC
For reconstructing apartment cores
For installation between two walls
For installation in timber-frame buildings
For floor thicknesses of 0-200 mm
For mounting a wall-hung WC with a connection spacing of 180 mm or 230 mm

Features:
Adjustable anchoring extendable feet with brake within 0-200 mm
Sliding waste holder mechanism in eight positions at a distance of 0-93 mm
Angle valve with the option of connecting to the Mepla pipe system
The load is transferred to the side walls by an expansion traverse adjustable within a range of 830-1200 mm
Once installed, the module is clad with plasterboard and no additional reinforcing or anchoring elements are required
The polystyrene insulation design prevents condensation on the surface of the tank and dampens the transmission of vibrations from the tank to the building structure
Prepared for connecting a holder with a DG 1/2" adapter for bidet seats and showers
Dual flush, independently adjustable, with a hygienic reserve
Option to install a remote or sensor flush
Compatible with all Alcaplast control buttons
The tank is made from a single piece, guaranteeing 100% impermeability
Water supply from the rear/top in the centre
Servicing without the use of tools
The service opening cover simplifies installation and prevents the penetration of moisture and dirt
Installation depth adjustable within the range of 20-95 mm
Installation depth 125 mm
Frame material: powder-coated metal

Scope of delivery:
Self-supporting frame with expansion traverse for anchoring between walls 830-1200 mm
1/2" threading for water connection with an integrated Schell 1/2-3/8" angle valve
Fixing set: screw Ø8x60 - 4 pcs, plug Ø12 - 4 pcs
Mechanism screw 2 pcs
Fixing material for securing the WC bowl: threaded rod M12 - 2 pcs, washers - 4 pcs, cap - 2 pcs, nut - 2 pcs, thread sleeve - 2 pcs
HT90/110 polyethylene, PE-HD waste elbow
Inlet seal, outlet fitting polypropylene, corrugated insert
Waste seal, connector polypropylene, connector seal
Set of installation caps to protect the connection openings during system installation
Easily shortened service opening cover

Technical parameters:
Water connection from the rear or top via mounting holes G1/2 "
Functional water pressure range 0.05-0.8 MPa
Recommended water pressure range 0.3-0.5 MPa
Large flush 6-9 l
Small flush 2.5-3.5 l
Standard large flush setting 6 l
Standard small flush setting 3 l
Hygienic reserve 3 l
Water volume in tank 9 l