Large Ash Pan (550 mm) for Boilers with Ball Chamber

Product detailed description

for boilers DC25GS, DC32GS, DC40GS, DC100, C30S, C40S, AC45S, KC45S, DC30SE, DC30GSE, DC40GSE, DC50GSE, DCxxGSX, DC25GSP(L), DC30GSP(L), DC25GSE (manufactured from 15 April 2012)

This ash pan is also intended for boilers DC25SP, DC30SPX and DC32SP manufactured from 2018!!!

ATMOS P0044 large ash pan is used to remove ash from deeper Atmos boilers that have a heat-resistant ceramic ball chamber fitted in the lower chamber (in three-chamber boilers, in the middle chamber) - see image above.

Parameters:

• length: 550 mm
• weight: 2.18 kg

Note: An ash pan for smaller Atmos boilers with a shorter chamber and ball chamber in the lower chamber can be found here: small ash pan for boilers with ball chamber.

For boilers DC25SP, DC30SPX and DC32SP manufactured before 2018, which have a roof in the middle chamber (i.e. not a ceramic ball chamber), the P0060 ash pan is intended.

For Atmos boilers DC25GSE manufactured up to 15 April 2012, the P0043 ash pan is intended.

Frequently asked questions

• How do I check that „Large Ash Pan (550 mm) for Boilers with Ball Chamber“ fits my exact appliance? The most reliable way is to compare the exact type/catalogue designation on your appliance's (boiler, storage tank, water heater) rating plate with the compatibility stated directly in this product's name (brand Atmos) and in its technical parameters above. If in doubt, send us the exact type designation of your appliance (including the serial number, if available) - we'll gladly verify compatibility for you.
• Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors or safety components (safety valves, thermal fuses) are typically dimensioned precisely for the parameters of a specific appliance (pressure, temperature, sensor electrical resistance) - the wrong part can reduce functionality, cause leaks, or in the case of safety components, create a genuine safety risk.
• Does this part need to be installed by a professional? For simpler mechanical parts (e.g. seals, covers, small accessories with no connection to electricity, gas or the pressurised part), a handy DIY-er can usually manage the replacement after disconnecting the appliance from power and supply lines. However, for any intervention in the gas, electrical or pressurised part of the appliance (e.g. sensors directly in the combustion chamber, safety valves, electrical modules), we always recommend a service technician - especially since such work could affect the validity of the appliance's warranty.
• How do I recognise that this part is worn and needs replacing? Common signs include visible wear/cracking (for seals and rubber parts), water or flue gas leaks at the part, an error message on the control display (for sensors and electronic modules), or a clearly reduced function of the appliance (e.g. irregular combustion for burner parts). If in doubt, it's safest to have the condition assessed by a service technician during the regular annual inspection.
• Is it worth keeping this part at home as a spare? For parts that are subject to regular wear (seals, fuses, small mechanical components) and whose failure would mean an interruption to heating or hot water, keeping a spare on hand is a sensible precaution - especially for older appliances, for which it can be harder to source a part quickly.