Leveling Clips Set SX3106 Level System T-Hold 1mm 500pcs

Product detailed description

Set of quality LEVEL SYSTEM T-HOLD leveling clips for aligning tiles and cladding. These clips are used together with leveling wedges and pliers during tile installation to achieve a level surface - insert the clips into the joints according to joint width, insert the wedge into the clip, and use special leveling pliers to align the tiles or cladding into one level plane. Once the adhesive under the tiles has hardened, break off the clips with a rubber mallet, fill the joints, and you're done. Wedges, pliers, and the mallet are not included in this set and need to be purchased separately as needed.
Simple, fast, and precise installation of tiles and cladding
Removes height differences between tiles and cladding, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During installation, insert clips with a width matching the required joint width into the joints between tiles or cladding.
2. Insert wedges into all clips.
3. Use leveling pliers to pull the first wedge into the clip until the tiles are level.
4. Based on the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has hardened (usually after 24 hours), remove the clips by striking them from the side in the direction of the joint with a rubber mallet.
Note: Wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 1 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
500 x Leveling clips 1 mm