Hybrid Voltage Inverter CARSPA CARSPA NMS-1500-24 DC/AC 24V/1500W MPPT Controller

Product detailed description

The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is therefore a backup power source with backup from the public grid or generator, a battery charger and an MPPT controller for solar panels, where the backup priority can be set the other way round, i.e. priority of the public grid and backup from batteries or photovoltaic panels.
- pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase off-grid output without dips (cannot be connected in parallel to the grid)
- clear and adjustable LCD display
- possibility to choose operating modes and power priority
- adjustable operating parameters as needed
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and excessive battery discharge
- possibility to use AGM and GEL batteries or LiFePO4 batteries (for experienced users only)
- if solar energy is not available, the battery can be automatically recharged from the grid
- audible warning for fault status and malfunction
- cold start function and eco mode
- powerful active cooling
Specifications:
Mains input voltage: 230V AC ±10% 50Hz
Output: 1 phase, 230V AC +- 5%
Rated inverter power: 1500W / 1500VA
Peak power: 3000VA for 3 sec.
Switching delay: 10 ms (for PC) - 20 ms (for household appliances)
Output waveform: pure sine wave
Battery voltage: 24 V
Float voltage: 27 V
Battery protection: <32 V
Battery type: AGM, GEL, LiFePO4 (optional, must be set)
Max. grid charging current: 40 A
Max. MPPT controller current: 40 A
Max. panel power: 1080 W
Maximum solar panel voltage (Voc): 150 V DC
MPPT controller operating voltage range: 30 - 150 V
Inverter power priority: solar only/UPS/grid battery
Charging priority: solar/grid/solar + grid/solar only
Self-consumption: 2 W
Efficiency: 98% (MPPT), 94% (inverter)
Dimensions: 286 x 240 x 91 mm
Operating temperature: 0 to 55 °C
Weight: 3.5 kg
Protection rating: IP20
Notes:
The 230 VAC output voltage is only available on the output terminal block. The AC OUT socket on the side of the unit is not connected, as it does not comply with our standards.
This product requires professional installation.