Options: Mixing raw water into permeate or flushing with permeate for HyRO 1.0 and 2.0
Code: DNM_BVPF-1-2Product detailed description
Options: Raw Water Blending into Permeate or Flushing with Permeate for HyRO 1.0 and HyRO 2.0
Raw water blending into permeate or flushing with permeate is a dual-purpose accessory for RO systems HyRO 1.0 (MO6500) and HyRO 2.0 (MO12000).
When the product is set to water blending, it allows mixing water from any stage of the water treatment process with RO permeate. The product can also be set to flush the membrane with permeate in the following cases:
• insufficient inlet water flow capacity for normal membrane flushing
• a longer membrane lifespan before CIP (Cleaning in Place) is required
• the inlet water treatment process can be designed for a smaller flow capacity without a peak flow demand during membrane flushing
Package contents:
• Solenoid valve
• Rotary flow meter 30 ... 240 L/h
• Piping set
• Mounting bracket
• Installation and operation manual
Key features
• Fast and simple installation
• Can be installed additionally if needed
• Detailed connection instructions
Technical data:
| Connection size | 1/2" |
| Connection type | G 1/2" |
| Flow rate | 30 - 240 L/h |
| Dimensions (H×W×D) | 38 × 30 × 23 cm |
| Weight | 1.5 kg |
Device dimensions may vary within a tolerance of ± 5%
Notice!
Please note that this product can be set to either raw water blending or permeate flushing, but not both at the same time!
The set is supplied as a separate product, which is installed on the
Additional parameters
| Category: | Filtration |
|---|---|
| EAN: |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Vytvořil Shoptet | Design Shoptak.cz.
>
>